Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Carlos G - May 25, 2023
Verified Purchase
Works as expected!
Easy to install!
★★★★★
★★★★★
Hector M - May 7, 2023
Verified Purchase
The part was easy to install in my washer machine!
The part was in great condition and came fast.
★★★★★
★★★★★
Benjamin C - March 25, 2022
Verified Purchase
Well made part
The belt was well made. Video instructions made replacing go well
★★★★★
★★★★★
Anne V - February 10, 2022
Verified Purchase
Perfect fit.
Installation was a snap and a perfect fit.
★★★★★
★★★★★
Jeffrey A. G - January 14, 2021
Verified Purchase
Easy repair
Easy repair when you have the right part/belt.
★★★★★
★★★★★
Kay D - October 11, 2018
Verified Purchase
Piece of cake to install.
Bought this and thrust bearing package. Works fine.
★★★★★
★★★★★
Stacey J - August 29, 2018
Verified Purchase
Did not receive part
I had the part shipped to a friends po box because I was in the middle of a move. Unfortunately. the post office decided to send the part back. I had to call Part Select, cancel the first order, and re-order the part again. The woman I spoke with was very nice and helpful. Still waiting for the part though
★★★★★
★★★★★
Jeff Y - June 26, 2018
Verified Purchase
Easy Repair
The YouTube videos on how to install the part made it quick and easy. I really appreciate how they explained things.
★★★★★
★★★★★
Marlow S - June 21, 2018
Verified Purchase
Drive belt worked great
Thanks. the belt is installed and works great.
★★★★★
★★★★★
Gary P - June 6, 2018
Verified Purchase
Drive Belt - 52"
Working well after installation
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 34 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace snubber ring and 6 suspension springs
As a 78 year old senior, I no longer have the upper strength and agility to remove the springs. Had to remove the washer casing (9 screws and 3 bolts), which gave me full access to r disconnect the springs, remove the tub, replace the snubber ring and reinstall the springs. The complete repair took me 6 hours, no assistance and was very t
... Read morehankful for the excellent videos available online. Parts arrived in 3 days, fantastic delivery service, great prices and fixed my washer for $107.
As for how I did the repair , I just followed your instruction video . The instruction video provided by Part Select was very very valuable. The snubber ring was a piece of cake BUT would have been really difficult without the helpful hints in the video like replacing three of the screws in the rings collar with three longer screws
... Read more so as not to disturb the spring under it. The suspension springs were a bit more trouble since my washer doesn't have an access panel on the back however THANKS TO YOUR TIP to stretch the spring and put coins between the coils made this much easier . I don't know many guys that are strong enough to lay down and reach through the front and put those springs on the back. Of coarse the belt was easy.
I also really like you list of probable solutions to the problems with the machine.
My wife is now happy with her washer again therefore I am also happy.
Thanks so much. I can see me being be a loyal customer for many years to come.
would no longer spin with a load of clothes, but would still drain the water.
Replaced the transmission pulley and bearing. Also I put on a new drive belt. I did the repairs exactly the way Steve does in the repair videos. Replace the Transmission Pulley and Bearing Kit - 5:44 Replaced the Drive Belt 52 inches - 1:10 Also I replaced the drain pump even though it still worked, because the machine is
... Read more19 years old. Replace the Drain Pump video - 6:22 min. After doing the repairs, the Maytag Atlantis washer now works fine.
Washer Machine would shake drastically during spin cycle (shaking more as water emptied outs because of the removal of the water weight during the spin cycle)
Part Select data showed that over 60% of the time, this issue of the washer shaking was due to broken support springs for the tub and over 30% of the time, it was a worn/broken snubber ring. So, I initially purchased the six springs and snubber ($30 total) from this site and completed both of those repairs. I leveled the washer securely
... Read more and tested it again. However, the washer still had the issue of shaking during the spin cycle with no improvement. So, I then researched again for this issue and parts recommended were a lower bearing kit or transmission. Since the transmission replacement was $429, that wasn't worth trying. So, for the $52 lower bearing kit, I ordered it from along with a new belt ($22) (even though the existing belt didn't show any signs of significant wear, but I changed it anyway). The new bearing kit was installed and the washer is now operating like new. I used the current videos on the website for replacing the parts that I ordered, and they were perfect step by step instructions. It made the repair very simple for anyone with any sense of do-it yourself ability and with minimum, ordinary tools. So, for approximately $110 for parts and doing the repair myself, the washer is like new again. Thank you!!!!
removed front door. removed one screw on wireharness cover. slid icemaker out. disconnected wireharness. removed bottom 3 remaining screws. reversed process to reinstall.
Grinding sound when unit was running and eventually locked up
Had to change the drain pump, the bearing was shot and was the reason for the noise and the eventual stopping/belt breakage....Watch the video on this site for the drain pump procedure it's very helpful....The drain pump swap-out was very easy...Two hose clamps and three small bolts and it was done in no time..I changed out the snubber ri
... Read moreng while I was in there... I used vise-grips to grab the the springs for removal/installation and lifted whe whole drum out....Just as others on here have suggested just loosen the retainer screws holding the old snubber ring just enough to slip it out and the new one in...It's really that easy...The toughest part is dealing with the springs and one piece of advice I can offer is to start with the hardest to reach first and save the easiest for last upon reassembly...Put it all back together and installed the new belt...DONE !!! Works like a champ !!!
Tipped the machine against the wall. This exposed the belt which is not inside the machine. Took the old belt off put the new one on.
Ron from Oxford, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
February 8, 2023
Not spinning enough water out of clothes?
For model number mav7650aww
Hi Wayne, thank you for contacting us. We would recommend checking the following parts: the bearing kit, part number PS2003651, and the drive belt, part number PS11739438. Good luck with your repair!
Spin cycle went out of balance frequently so ordered new springs and snubber ring. When pulling out washer to begin repair I notice a perfect black circle bearing perfectly centered about the washer foot print on the floor under the washer. It was a greasy substance that I was able to remove with a degreaser. What is going on? And do I need additional parts or repairs? Thank you.
For model number MDE5000AYW
Hi Tom, thank you for contacting us. You may need to check the drum support roller kit, part number PS1570070, to fix the issue. It holds the drum in the proper position while it spins on the support wheels. We hope this helps, good luck with this repair!
