The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP22003393 replaces these:
AP6006362, 22003393
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer would go thru complete cycle but water wouldnt drain advanced timer around to spin mode washer would complete water would drain
Removed 5 phillps head screws from back of control panel which would allow control panel to swing forward removed pin that secures knob to timer, removed 1 phillps screw that secures timer to back of control panel. Unplugged wire harness reversed all steps installed new timer.Ran washer thru 2 cycles worked like a new one. Saved 80 bucks
... Read morefor service call plus part mark up. Who needs maytag repairman.
Read less
Gary E from Springfield, OH
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
14 of 22 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Deborah
August 30, 2017
My washer will not spin. Seems like the timer is in the off position and turns the machine off instead of spinning. If i try to set it to spin, it does nothing. Not sure if the timer is bad or something else and really don't want to spend money on unneeded parts. Can you help please. Thank you in advance.
For model number MAV6300AWW
Hello Deborah, thank you for contacting us. A common part that can prevent the washer from spinning would be the door latch/switch. If this becomes faulty the washer will shut off before spin cycle as it thinks the door is open due to faulty switch. You can test this with a multi-meter to determine if it is faulty. Hope this helps!
