Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739432
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
pull washer away from wall. unplug washer. check to be sure washer is unplugged. have significant other check to be sure washer is unplugged. unsnap front of cycle select knob. use needle nose to pull metal retaining clip. pull off knob and spring. pull off bottom portion of knob. check to be sure washer is unplugged. remove three phillips screws and two 1/4 hex screws from control back panel & remove back back panel. remove two 5/16 screws from front of control panel, right behind knob you removed. working behind control panel maneuver timer to remove. unplug timer. plug in new timer; plug is keyed so only goes in one way. maneuver timer back into place. tighten two 5/16 screws from front of control panel. re-install knob, spring, clip, cap. re-install rear control panel. plug back in washer. push back into place.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I replaced the timer.
Took off upper back cover, after unplugging washer. Pulled center cap off knob to release the dial from the timer. Removed the dial. Removed screws that held timer. Unplugged timer from wire harness. Reversed procedilure to install new timer.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.