Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/52858.gif
See part 13 in the diagram
http://www.partselect.com/Schematics/Maytag/52858.gif

Timer

PartSelect Number PS11739378

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.

Compare At

$210.12

You Save

$35.02

Your Price

$175.10
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

11 of 12 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Jorge from Corona, CA

Would not complete the "white" or "color" cycle.

Would not complete the "White" or "Color" cycle, it would get stuck on the rinse section. The only cycle that would complete was the Delicate cycle.

The Repair was quite simple. By removing the upper rear plate, you have access to all of the control and switch parts of the washer. It takes 5 screws to completely remove it.
Removing the cycle selector knob was easy too. With a screwdriver you can remove the top cap of knob. Once thats done all you do is remove the small metal clip(easy remove and replace).
Unplug the main electric connector and ground from the timer.
Once the knob is off, all you have to do is remove the 2 screws in the front(right behind the knob).

Easier than I thought for a first time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • Timer
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: nick from dallas, TX

Switch knob appeared stripped, wouldn't turn on

Looked at the schematic that was provided on the web site to take off the switch. Followed the basic instructions that were posted on this web site to make the repair. It was very simple

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2