Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739297
This timer knob is not quite three inches in diameter. It is all gray in color and it is made entirely of plastic.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
All I did was put the three pieces together (1-2-3! So easy) and attached to the metal piece of the dryer. Now I can set the dryer to any temperature and time I need!
Help other customers find the most helpful instructions.
Were these instructions helpful?
I ordered a new timer skirt and also a new timer knob(only to be safe) and they arrived the next day! I watched the instruction video on your website and it showed me how to take apart the skirt knob and cover. It was so easy. I reassembled the three parts which took about 2 minutes and put it back on the silver post that holds the timer dial. It worked as good as new. My husband was proud of me. I have recommended your website to my friends.
Researched for the part numbers and found the parts needed. In this case the timer knob is made up of 3 separate pieces that easily snap together.
Ordered the part..... waited a few days fro it to arrive, (it came quite quick considering). Sat down in my easy chair and assembled the knob and gave it to my wife to slip it on the dryer. Whew, I was beat.... hehe
Removed clip that held timer knob in place, replaced timer know with new one and reinstalled clip. The snapped on the new cap. Took a whole minute to do.
called SEARS told part not available any longer. Would have to purchase new dryer. Also told part could not be ordered from MAYTAG due to age. Called PART SELECT and had new parts in four days. Put new knob on, Placed door lock in hole, JOB DONE (15 minutes) saved $ 500 to $600 on new one. Wayne
hey this was so easy that 6 year old could put the parts together..I loved this! No repairman and no going to an appliance store and getting frustrated.Easy as pie!
Replaced the igniter and the primary coil. Igniter now glowed but no gas. Replaced the secondary coil and bingo, it worked. Sounds like a common issue. I'd order both coils together and the igniter if you have the same problem.
the pictures on your web site allowed me to positively identify the 2 pieces quickly and surely. replacement was a snap and took less than 2 minutes. Thanks!!
I pulled the dial off. Fit the three new parts together. I put in stem of the timer and turned the dryer on.Very easy, No tools required except a screw driver to pry the old knob off.
Discovered the problem then did an internet search for the part ordered and received it in 4 days.
It was easy as 1,2,3. Took the old knob apart and replaced it with new one. About 20 minutes.
Wow it was the easiest thing I have ever done.. I am NOT a DIY person.. Company wanted $108.00 to do, it cost me less than $20.00 and 2 minutes.. I have told everyone I know!!! Thanks
Simple...put knob together and put in place. Lint filter...put in place!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.