Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739284
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Well, I found the washer leaking water from the bottom a couple weeks ago. I finally got around to pulling off the front panel and ran a couple cycles to see where the water was coming from. Turns out the leak was at the plastic pump that does the draining after wash and rinse.So I got the model number and googled online. I found Partselect and they had every part I needed. Took me 10 minutes online to find the parts for my specific washer. I couldn't believe how easy it was. Parts came in two days...and this was right before Xmas.Anyways, changing out the pump was simple. Took 5 minutes to get it off and put the new one in. I decided to change the hoses and elbow siphon break as well while I had the thing apart as those parts were old...but still working well. Got the washer back together and the floor is dry as a bone. Perfect repair, really easy to do. Hardest part was figuring out how to get the front panel off.
Help other customers find the most helpful instructions.
Were these instructions helpful?
1. Unplug power to the washer.2. Remove 2 screws from bottom front panel on either side. Panel then rotates out and unhooks at the top. Remove front panel3. Remove bolts from underneath the top front on both sides using a socket. 4. Rotate the top upward to provide space to see and work.5. From the back of the washer, remove 4 bolts using a socket around the drain tube at the upper left. 6. From the front, the siphon valve can be removed from the inside upper right. 7. From the front, unscrew the clamp holding the drain hose on the water pump housing at the bottom right front and remove the hose. Be prepared for water to drain from the hose. Remove hose and siphon valve together and discard.8. Install new hose on new siphon valve and screw new clamp tight. Make sure the rubber ring is inserted properly on the new valve (See old valve for reference) 9. Holding the siphon valve in place, use a socket and re-attach the 4 bolts around the drain tube at the back of the washer. 10. From the front, insert the opposite end of the new hose to the water pump at the lower right front and screw the circle clamp tight. Note: Re-use existing clamp. 11. Rotate the top back down into normal position. 12. Plug the power back in and run a short cycle and watch for leaks. 13. If no leaks, re-attach bolts for the top with a socket. 14. Re-attach front panel with 2 screws. Done.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.