Quick Question!

Have you ever purchased from PartSelect.com before?

11739284-1-S-Whirlpool-WP22001448-Pump-to-Siphon Break Drain Hose
11739284-1-S-Whirlpool-WP22001448-Pump-to-Siphon Break Drain Hose 11739284-2-S-Whirlpool-WP22001448-Pump-to-Siphon Break Drain Hose http://www.partselect.com/Schematics/Maytag/37313.gif

Pump-to-Siphon Break Drain Hose

Compare At

$48.14

You Save

$8.02

Your Price

$40.12
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11739284
Manufacturer Part Number WP22001448
Manufactured by Whirlpool

This part works with the following brands: Maytag, International, Jenn-Air.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Leaking.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

167 of 190 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Joseph from Plano, TX

Leaking water

Well, I found the washer leaking water from the bottom a couple weeks ago. I finally got around to pulling off the front panel and ran a couple cycles to see where the water was coming from. Turns out the leak was at the plastic pump that does the draining after wash and rinse.

So I got the model number and googled online. I found Partselect and they had every part I needed. Took me 10 minutes online to find the parts for my specific washer. I couldn't believe how easy it was. Parts came in two days...and this was right before Xmas.

Anyways, changing out the pump was simple. Took 5 minutes to get it off and put the new one in. I decided to change the hoses and elbow siphon break as well while I had the thing apart as those parts were old...but still working well.

Got the washer back together and the floor is dry as a bone. Perfect repair, really easy to do. Hardest part was figuring out how to get the front panel off.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

23 of 26 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Steven from Indianapolis, IN

Leaking siphon break valve

1. Unplug power to the washer.
2. Remove 2 screws from bottom front panel on either side. Panel then rotates out and unhooks at the top. Remove front panel
3. Remove bolts from underneath the top front on both sides using a socket.
4. Rotate the top upward to provide space to see and work.
5. From the back of the washer, remove 4 bolts using a socket around the drain tube at the upper left.
6. From the front, the siphon valve can be removed from the inside upper right.
7. From the front, unscrew the clamp holding the drain hose on the water pump housing at the bottom right front and remove the hose. Be prepared for water to drain from the hose. Remove hose and siphon valve together and discard.
8. Install new hose on new siphon valve and screw new clamp tight. Make sure the rubber ring is inserted properly on the new valve (See old valve for reference)
9. Holding the siphon valve in place, use a socket and re-attach the 4 bolts around the drain tube at the back of the washer.
10. From the front, insert the opposite end of the new hose to the water pump at the lower right front and screw the circle clamp tight. Note: Re-use existing clamp.
11. Rotate the top back down into normal position.
12. Plug the power back in and run a short cycle and watch for leaks.
13. If no leaks, re-attach bolts for the top with a socket.
14. Re-attach front panel with 2 screws. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Socket set
Customer: john from COTTAGE GROVE, MN

Leaking hoses and low tension on belts

opened front of washer, removed motor, replaced glides and springs, installed motor and replaced belts. Installed new hoses and vacuum breaker. Its been a week now and no leaks or other problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11739284
Manufacturer Part Number: WP22001448
Brand Model Number Description
MaytagA104Washer - Top Loading
MaytagA105Washer - Top Loading
MaytagA110Washer - Top Loading
MaytagA112Washer - Top Loading
MaytagA180Washer - Top Loading
MaytagA181Washer - Top Loading
MaytagA182Washer - Top Loading
MaytagA183Washer - Top Loading
MaytagA190Washer - Top Loading
MaytagA1910Washer - Top Loading
MaytagA209Washer - Top Loading
MaytagA209SWasher - Top Loading
MaytagA210Washer - Top Loading
MaytagA210SWasher - Residential
MaytagA211Washer - Top Loading
MaytagA211SWasher - Top Loading
MaytagA212Washer - Top Loading
MaytagA212SWasher - Residential
MaytagA282Washer - Top Loading
MaytagA283Washer - Top Loading
MaytagA284Washer - Top Loading
MaytagA305Washer - Top Loading
MaytagA310Washer - Top Loading
MaytagA310SWasher - Residential
MaytagA312Washer - Top Loading
MaytagA312SWasher - Residential
MaytagA382Washer - Top Loading
MaytagA390Washer - Top Loading
MaytagA3910Washer - Top Loading
MaytagA410Washer - Top Loading