Motor Housing WP2195914

Hi Robert, Thank you for your inquiry. This part does not include the switch. The part you are looking for is the ice motor kit, part number PS733947. I hope this helps. Thank you and have a great day!

Hello Wanda , Thank you for your inquiry. Although we do not have a video for this exact part, I have included a link for replacing an ice maker assembly for a similar model. Good Luck with your repair! https://www.youtube.com/watch?v=hmCE3oKpEk0&t=22s

Hi Stan, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.

Hello Jim, Thank you for the question. At times when the filter is due to be changed, the flow slows down and can freeze in the water lines. We suggest checking the lines to make sure they are clear and thawed. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Jim, Thank you for your question. It sounds like you will have to replace your water inlet valve. I would suggest testing that part with a multi meter to double check it. I hope that helps. Good luck with your repair.

Hi Jeff, thank you for your question. Without your appliance model information we are not able to look at the parts however it sounds like you are having an issue with your water inlet valve. You may want to test that part with a multi meter to be sure it is working correctly. I hope that helps. Good luck with your repair.

Hello Jerry, Thanks for your question. You may wish to test the ice maker motor kit, along with the light switch, door switch, and the thermostat. If they are not showing continuity or are faulty, replace them. I hope this helps.

Hi Dave, Thank you for your question. If the ice maker valve is leaking, check and make sure that the water line fittings are secure. If there is water leaking, check the fill cup to see if that is causing the issue. If there is water leaking from the ice maker, a component in the water inlet valve may failed and you will need to test it to see if this is the problem. Unplug your refrigerator, disconnect the water supply and locate your water inlet valve. It is usually on the rear of the refrigerator, near the bottom. You will need to remove the rear panel to access it. Inspect the valve inlet supply connections for leaks and tighten or replace the connectors. You should also inspect the valve body for any cracks or damage. Check the outlet tubing for cracks or abrasions that may also create a leak and replace any cracked or brittle tubing and connectors. If none of the above appear to be the cause of the leak, remove the water inlet valve from the unit. Using a multi-meter on the Rx1 setting, test your valve for continiuty by placing the probes on the valve’s terminals. You should receive a reading of 200 to 500 ohms. If you receive any other reading, you need a replacement water inlet valve. We hope this helps. Thank you and have a great day.

Hello Eric, thank you for asking! Prior to moving towards parts make sure the freezer temperature is -12C or below. If the temperature is above that you will need to clean the condenser coils and defrost the evaporator. Now check the water inlet valve (part number: PS3497634) and make sure the water pressure is not less than 20 psi. You can inspect the water inlet valve with a multimeter. If we are ok there, then the most probable cause is a faulty ice maker control assembly, part number PS2341896. If your ice maker control is defective it can no longer properly control the ice maker functions. It may not produce any ice, make small ice cubes, or have an intermittent operation. Please contact customer service if you need assistance with purchase or repair. Thank you.

Hello Mckinley, thank you for the question. The dispenser electronic control board, part number PS11753908, controls the ice maker. We hope this is what you were looking for!