Quick Question!

Have you ever purchased from PartSelect.com before?

11739142-1-S-Whirlpool-WP2188917-Shaft
11739142-1-S-Whirlpool-WP2188917-Shaft 11739142-2-S-Whirlpool-WP2188917-Shaft http://www.partselect.com/Schematics/Maytag/PMMHF5PQ.gif

Shaft

PartSelect Number PS11739142

This part is the drive shaft for the auger.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.

Compare At

$25.93

You Save

$4.32

Your Price

$21.61
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 2 reviews What's this?
1-2 of 2
 

38 of 74 people found this instruction helpful

Parts Used:
  • Shaft
Level of Difficulty: Really Easy
Time to do repair: More than 2 hours
Tools: Nutdriver
Customer: terry from panama city beach, FL

Ice would not drop

removed the shaft that had worn end-replaced with new one- ok now

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Gary from HILLSBORO, OR

Ice maker would run but not dispense ice

Removed the ice bin and turned it over. Removed the old coupling and replaced with the new one, reusing the screw that holds it in place. Then removed the cover plate over the drive shaft that comes out of the door. Pulled out the old shaft and removed the plastic ring that keeps stuff from falling into the motor area. Put the ring onto the new shaft and slowly put the new shaft down into the door until it seated in the motor assembly. Replaced the cover plate with the nut driver and voila! The Ice Age has returned. An easy fix once I determined that the drive shaft end was worn where it engages the coupling, causing it to slip and not move the ice dispenser arm.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2