Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Whirlpool/N9KUXD9Z.gif
See part 6 in the diagram
http://www.partselect.com/Schematics/Whirlpool/N9KUXD9Z.gif

Water Inlet Valve - 120V 50/60Hz

PartSelect Number PS11739130

This is a double solenoid valve.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Ice maker not making ice.
  • Not dispensing water.

Compare At

$74.83

You Save

$12.47

Your Price

$62.36
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews What's this?
1-1 of 1
 

89 of 100 people found this instruction helpful

Parts Used:
  • Water Inlet Valve - 120V 50/60Hz
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: John from Lincoln, NE

Inlet valve broken from freezing in storage

Simply remove 5 or 6 self tapping screws to lower the cardboard backing with a 5/16 nut driver. Loosen two screws that hold the valve to the metal lip low on the back. Push 3 easy-connect fittings towards the valve while pulling the poly tube out at the same time. Replace the tubes by simply pushing into the fitting. I did these one at a time so I wouldn't get them mixed up. Fasten the valve back onto the metal lip, and screw the cardboard back on. Move the Fridge back and the job was all done~!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1