Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739060
This white overflow grille is located on the bottom of the ice/water dispenser.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
The overflow grille was no problem. It just slides out. To get to the levers, you need to remove the front cover trim. Pay attention to where everything is before you remove parts and how the wiring is set up (over or under parts). There are two slots below the trim, use your blade screw driver and pop the trim. You'll notice that the 4 buttons for ice (crush - cube) and the light (off-on) are on that panel. I don't recall well, but I believe two screws (one at each side) hold that part in place. Once loose, I flipped it up, disconnected the white multi- wire quick connector and used duck tape to tape the panel to the door and keep it out of the way. Another screw keeps the levers in their place, with a metal element. Remove it and the levers will come out. The ice guide just snaps out from two sides and a middle plastic hook of the ice dispenser lever. Replace everything in reverse order. That's about what I remember. Hope it helps.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I'm trying to sell my house but the dishwasher was black and the rest of the appliances in the kitchen are white. I ordered the white panels for my dishwasher online at partselect.com. Two days later they arrived and for just over $100 i had a matching white dishwasher. It was a much cheaper solution than replacing an otherwise perfectly good black dishwasher with a white one to match the other appliances. The total time to change the panels was approximately 15-20 minutes. The project only required a phillips head screw driver .
I replaced these parts mainly for aesthetic reasons and to prepare our home for a rental. I was very impressed with PartSelect's customer service and delivery. The part literally arrived the next day. Will definitely do business with them again.
Some screw not easily accessible. I broke the ice dispenser mechanism but could glue it back so everything fine for now.
Just slipped old one out and put new one in.I will definitely use this company again..it was easy to order and the part arrived quickly.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.