Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11739042
This door closing cam is located on the bottom of the fridge/freezer.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I removed the items from inside the door and removed the door from the refrigerator at the upper hinge. Removed cam from the door and replaced with the new one. Checked for proper operation and it's quiet as a mouse. I love it.
Help other customers find the most helpful instructions.
Were these instructions helpful?
supported the door on blocks. removed old parts with a socket and ratchet. the new parts didn't line up quite right, so some modification with a dremel was necessary. otherwise, the repair was very simple.
pulled top hinge pin off with 5/16 nut driver ,lifted door off and was able to see both parts and replaced them just like they were,easy fix
Removed the door, laid the door on its side, and pulled the worn part from the door. Inserted the new part, reattached the door, and it works like a charm. The parts diagram online was very helpful. I ended up purchasing a part I didn't need in case an unidentified washer came with it, but I didn't need it. No big deal.
Removed the door and replaced the lower door cam. Old lower door cam was completly stripped. Insatalled new one and door sealed again! Yay!
pulled all shelves from refrigerator door. unscrew the top plate and lift door out of bottom. pulled old cams off the door and the lower bracket and installed the new cams. put door back on and screwed the top bracket back on. installed the door shelves back in the door. never took the food off the door shelves. easy, easy, easy.
Removed top cover, then removed top hindge pin plate, then removed the door. Replaced the Lower Door Closing Cam, Reinstalled door and hindge pin plate and cover.
Removed the door with Socket set & removed the lower door closing cam, replaced it with the new one and reattached the door. Biggest part of the problem was diagnosing the part needed. I replaced the filter while I was at it.
supported door with blocking and removed lower arm and cam. Replace cam and re installed arm.removed blocking from door and tested completed installtion of cam. all went well.
i blocked up door took brakets off replaced plastic cams put back together door works like new one
Took off the top cap, undid the 3 screws holding the top door bracket on, took off the door, repshove the lower door closing cam pieces, and then put the door back on...piece of cake, dude.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.