Quick Question!

Have you ever purchased from PartSelect.com before?

11739026-1-S-Whirlpool-WP2180224-Ice Guide
11739026-1-S-Whirlpool-WP2180224-Ice Guide 11739026-2-S-Whirlpool-WP2180224-Ice Guide 11739026-3-S-Whirlpool-WP2180224-Ice Guide http://www.partselect.com/Schematics/Whirlpool/6GWTW553.gif

Ice Guide

PartSelect Number PS11739026

This ice guide is located in the freezer door.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.
  • Ice maker dispenses too much ice.
  • Leaking.
  • Door Sweating.

Compare At

$13.96

You Save

$2.33

Your Price

$11.63
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 38 reviews What's this?
1-15 of 38
 

133 of 148 people found this instruction helpful

Parts Used:
  • Ice Guide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Tracy from Jacksonville, FL

External ice guide broke a tooth and fell off

We waited two years to do this because we didn't want to hassle with a repair man to come out and charge us arm+leg for something so simple. Finally we searched and found the part on line. It came two days FASTER than promised. Kudos to Part Select.
Snapping it on was a breeze, although you do have to apply more pressure than feels comfortable with plastic clips. We can know get ice out of the external door system again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

38 of 52 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Mario from Oklahoma City, OK

Replacing still working but old and stained levers

The overflow grille was no problem. It just slides out. To get to the levers, you need to remove the front cover trim. Pay attention to where everything is before you remove parts and how the wiring is set up (over or under parts). There are two slots below the trim, use your blade screw driver and pop the trim. You'll notice that the 4 buttons for ice (crush - cube) and the light (off-on) are on that panel. I don't recall well, but I believe two screws (one at each side) hold that part in place. Once loose, I flipped it up, disconnected the white multi- wire quick connector and used duck tape to tape the panel to the door and keep it out of the way. Another screw keeps the levers in their place, with a metal element. Remove it and the levers will come out. The ice guide just snaps out from two sides and a middle plastic hook of the ice dispenser lever. Replace everything in reverse order. That's about what I remember. Hope it helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

15 of 23 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Brandie from Dover, AR

Ice was being made, but wouldn't drop

My icemaker wouldn’t pop out the ice. I bought a used fridge from 2nd Time Around in Russellville AR which was the most horrible customer service experience of my life. They were supposed to have a 60 day warranty but didn’t follow through. After months of begging them, and knowing what part I needed, I just ordered it myself. It was so easy and quick and fixed my issue my husband said we should have done that months ago and avoided the hassle. It was worth the money to have the peace of mind. Now everything is perfect! All we had to do was remove the icemaker, take off the side with a screwdriver, replace the part and slide it back in. We had ice in hours! Shipping was quick (a couple days) the part was 30 dollars cheaper than other places I checked. We love it!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Wrench set
Customer: Diana from GILBERT, AZ

Water and ice dispenser discolored

I replaced these parts mainly for aesthetic reasons and to prepare our home for a rental. I was very impressed with PartSelect's customer service and delivery. The part literally arrived the next day. Will definitely do business with them again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Becky from Hamlet, NC

Ice bin drum blades broke into pieces wouldn't despense ice.

After removing a few screws to get to the drum my husband had it back to working like a charm.This part seems to be better made than the original part in the refrigerator.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 12 people found this instruction helpful

Parts Used:
  • Ice Guide
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Bloomington, IL

Plastic ice cube guide installed

Mine is a simple tale of the missing ice cube dispensor guide. When we moved, the guide was missing so when I built our new home with a kitchen in the basement I wanted to hook up the ice dispensor but when I did, the ice cubes always fell off to one side. I decided to order the misssing part on-line. I ordered it paid for it and then received it the next day-wonderful. Within ten minutes, I was ready to go. Thanks for great service. Rick Davis, Bloomington, IL.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

8 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: roxana from dinuba, CA

Leaking water dispenser

worked great parts were perfect!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Serge from San Jose, CA

Water and ice dispensers were old with hard water

Some screw not easily accessible. I broke the ice dispenser mechanism but could glue it back so everything fine for now.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 6 people found this instruction helpful

Parts Used:
  • Ice Guide
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: John from Albuquerque, NM

Ice guide broke during cleaning

Part would not fit straight in. Used universal joint on end of extension to reach screw rather that disassemble front. Managed to slip the paddel just far enough to one side and angled to snap ice guid on and then slipped paddel back into place. Used a dab of candle stickum on the screw head to heep it in the socket and then inserted in door. $7 part, 15min and saved $$$$$$ over a service call;)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Brian from Cutler Bay, FL

Ice guide broke off; bin cracked

We saved hundreds in not calling the service. The ice guide popped right in. As one other person mentioned, took a little force, but no problem. And bin slid in easily. DIY is the way to go these days.

Thanks, PartSelect.com

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Ice Guide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Cathy from North Liberty, IA

Ice chute broke

Just like they told me to do.Insert bottom then sides.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: JOHN from JACKSONVILLE, FL

Both parts where broken

The ice guide slipped into place and latched into the arm with no problems. The nozzle went in so easy once I figured out that it was run through a tube in the door, I thought at first I was going to have to take the door apart. The biggest surprise was the how quickly I got the parts, I recieved in 1.5 days. Thats amazing. Thank You.

Stan

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
  • Ice Guide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: ALAN from ASH, NC

Tab was broken on ice guide

Old part would not stay in place (broken). Recieved new part and snapped it in to place . No tools needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: George from Anderson, SC

Water desper nozzel, control bracket ice guide missing and door trim off

Popped fromt pannel off from bottom side removed 2 screws from control bracket and took switches etc. off old bracket. removed broken water tube and cut top off. Secured black tubing together and pulled down through door fastened into exixting fitting repolaced one screw. placed switches onto new control bracket and okaced back with 2 screws. Snappec ice guide in place then replaced cover into notches in top and snapped into place. incerted 2 new door handle trim clips into trim and slid into place,,,,finished

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Ice Guide
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Charles from Coon Rapids, MN

Ice guide tab was broken

Detached the broken ice guide by expandong the opening bewteen the tabs with my hands. Installed the new ice guide and pressed into place. Took about 3 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 38