Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738944
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
installed new drawer
Help other customers find the most helpful instructions.
Were these instructions helpful?
I loosed the one screw and lifted off the cover. Then I put on the new cover and tightened the screw. It could not have been any easier.
first I removed the drawer, then I removed the shelf frame.I replaced the front gasket on the shelf frame. This new gasket was to long, I cut it to the correct length with a utility knife, then snapped it to the shelf frame. I used the old rear gasket, which snapped off the old frame and it had to be trimed about 1/4" to fit the new frame. Then I placed it back in the refrigerator and installed the drawer.
Removed old slide and snapped in new one
Ordered the new shelf, moved a deflector from the old to the new shelf and inserted the new shelf into the refrigerator.
I ordered the replacement part using the helpful diagrams and parts list. When the replacement part arrived, it looked exactly like the old one, but brand new. I removed the lower crisper drawer and the one above it for clearance. Then I carefully lifted out the glass shelf insert and set it aside carefully. Then I lifted the old frame up in front and off the hooks, then pulled it forward and out. I installed the new one by reversing the order. It went in easily and fit perfectly. Then I replaced the glass shelf and the two drawers, and I was done. Good as new!
Very easy to install -
Super easy! Pulled out the drawer above and below the shelving unit that I had to replace. Pulled out the Shelf Frame, took the glass off and put it in the new Shelf Frame, put the frame in place and put the drawers back. Done!
repair was very easy - remove refir drawers, remove broken shelf frame, remove rear gasket and reinstall on new drawer frame - replace frame, drop in glass shelf top, replace drawers. Total time: 10-15 minutes. Sweet. :)
Remove and replace
Removed the crisper/old shelf frame and placed the new shelf frame in position and put crisper back into place.
First I must say how surprised and happy I was to get this part the very next day! I simply remove old frame and replace with new. Ordering the right part was easy with the part selection diagram. Will always remember this site and will definately be back if I ever need parts again! I've told many friends about this site who never knew they could replace parts like this instead of putting up with whatever broke until they could afford to buy new!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.