Quick Question!

Have you ever purchased from PartSelect.com before?

11738878-1-S-Whirlpool-WP213015-Plastic Injector Nozzle
11738878-1-S-Whirlpool-WP213015-Plastic Injector Nozzle http://www.partselect.com/Schematics/Maytag/37308.gif

Plastic Injector Nozzle

PartSelect Number PS11738878

This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.

Compare At

$16.62

You Save

$2.77

Your Price

$13.85
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 49 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench set
Customer: Tina from Enigma, GA

Water pouring out instead of going into tub

watched the video on the site and went at it. lol Repair was fast and easy , almost 30 yrs old and still washing like a charm! Mite be the last one made in America !!!!! Too bad!
Thanks for the help and will def recommend the site to friends. I actually got it from a friend

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench set
Customer: Richard from Ridgefield, CT

30 year old washer started to leak on left side

Noticed small pool of water on left side. Diagnosed it was injector tube. Ordered parts.

Removed front panel by removing two phillips screws and then pushed down to disengage spring clips.

Used nutdriver to remover two bolts holding top cover and then undid bleach dispenser hose.

Lifted top cover and removed clamps holding injector and fill. Replaced using 1 1/16" Stainless steel screw clamps.

THIS WAS THE FIRST REPAIR EVER ON THIS WASHER!! SIMPLY AMAZING PERFORMANCE. STILL SPINS AT HIGH RPM AND IS QUIET. Bought for my folks as a gift in 1979.

This is the reason I bought the last Maytag top loaders made in '05. Also had another one 24 years with only one repair.

Parts Select, thank you! Parts arrived in three days.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Jon from N.R.H., TX

Water on floor when filling

removed front panel, lifted top of washer and tilted back,pulled black fill hose off clear plastic vent,pulled worn retainer out and put new one in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set
Customer: Elzo from Kalamazoo, MI

Leak coming from underneath washer. Source unknown

Removed front panel ( 2 swrews). Turned off water to washer. Unplugged power cord. Removed two screws holding down top of washer. Located source of leak. It was the injector valve. Removed hose clamps. Removed defective injector valve (2 parts). Installed now injector valve (2 parts) as shown in video. Tightened hose clamps. Replaced top cover and front panel. Done

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Socket set
Customer: Ronald from Buford, GA

Minor water leakage visible on floor on left side of washing machine.

I opened up the front panel of the washing machine and noticed that water was leaking from a hose along the top left of the machine. I ordered a new plastic injector nozzle and rubber injector valve. The parts arrived in 2 days. Switchout of the parts took less than 5 minutes. Tested it out; the leak was gone. Total cost $22.62. Money well spent!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Richard from Nashville, TN

Water leaking

Followed repair guidance provided on website: 1) Removed front panel of washing machine by removing two phillips-head screws (bottom front of machine) and lifting front panel from bottom. 2)Removed two hex-head from front corners of top panel. 3) lift front panel to gain access to Injector Valve and Nozzle. 4) Removed hose clamp, removed hose, removed old valve and nozzle. 5) Replaced components in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Socket set
Customer: Chris from Atlanta, GA

Leaking

First removed front to see approximately where the leak was - left side from the front. Parts arrived quickly. Removed top and swung up to the left side (not the back). Video was very helpful at showing how to replace valve and nozzle. The old valve did indeed have a hole in it and the injection had some perished rubber slime. Closed back up. Hit snag - the top loader door latch was not engaging preventing the machine operating. Hmm. Opened up again and with flashlight located sound of buzzing relay (being careful since the machine was powered) Noticed a wire was caught up in the relay. Disconected power. Re-sited wire and used a twist to hold to other wires to keep it out of the way of the relay. Closed back up. Everything fine. So glad to keep my 24 yr old machine going! Amazing that this was the first time it had ever been moved and opened up. Moving and cleaning was be far the longest part of the whole operation. Great site.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Bill from Jackson, NJ

Leaking washing machine

replaced parts

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Sandra from Norwell, MA

Water leaking on the floor during fill, coming from back left corner of machine

The hardest part and most time consuming was opening the machine the first time due to rusty bolts. After using WD-40 to loosen the bolts it was very easy to find the leak. I ordered the parts on Sat. received them on Tues A.M. Including opening the machine again replacing the parts with the new ones and putting it back together, it took less than 30 mins. Please Note: I am a woman and except for the orginal opening when my son helped with the rusty bolts I did this myself. EASY EASY EASY!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set, Wrench set
Customer: Beth R from Lavale, MD

Leaking injector hose

I removed the front panel 2 screws. Then two screws holding the top deck. Two clamps removed on both ends of rubber injector. Replaced the nozzle and rubber valve, which was leaking. Buttoned the screws and washer works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Russell from Tucson, AZ

Water was leaking on the left side/

Removed the front cover with two screws at the bottom face. Two steel bolts and the top raises up. Removed the old rubber part and put the new one in. NO LEAK!

I had read where several people had to do the same thing. I will always have a washer basin under it from now on though.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Kevin from Hinckley, MN

Water leaking from fill hose

First I removed the front cover by removing screws
towards the bottom of the front. Then I removed the
bolt in each of the front top corners. Now you can lift the top all the way up. Next I located the filler hose that has the injector nozzle and the rubber injector valve. Next I loosened the clamps that hold these parts in place. Next I replaced the worn parts with the new parts and reassembled everything in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: Chuck from Vashon Island, WA

Leaking water

I removed front panel and top hold down screws. Then removed the clamp, replaced the rubber injector valve and the plastic injector nozzle. re-assembled the unit and tested - everything worked fine - no leaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers, Socket set, Wrench set
Customer: Ronald from Meridian, ID

Water was leaking on to the floor.

Assembled the parts, put them into the machine, moved it back into place, started it up and it is running fine. Thanks for the good service, good parts and they arrived on time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers, Socket set, Wrench set
Customer: Ernest from Bergenfield, NJ

Water leak

open washer as direct from your repair page. Saw where water was coming from . replace parts , ran washer , job done. thank you for your help.

Help other customers find the most helpful instructions.

Were these instructions helpful?