Quick Question!

Have you ever purchased from PartSelect.com before?

11738875-1-S-Whirlpool-WP212716-Washer Lid Bumper
11738875-1-S-Whirlpool-WP212716-Washer Lid Bumper 11738875-2-S-Whirlpool-WP212716-Washer Lid Bumper http://www.partselect.com/Schematics/Maytag/37306.gif

Washer Lid Bumper

PartSelect Number PS11738875

This washing machine lid bumper is just under an inch long. It is all gray in color and is made entirely of rubber.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.

Compare At

$6.18

You Save

$1.03

Your Price

$5.15
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 3 people found this instruction helpful

Parts Used:
  • Timer
  • Washer Lid Bumper
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Elvis from Meriden, CT

The washer would start then shut down. If I pulled the timer switch out, I would pull out and and held with some force everything would function properly.With a

Removed the two screws on top. pulled the panel apart. I disconnected the harness.Removed the timer. Installed the new timer.Connected the harness.Assembled the panel.Installed the screws.I was done. Works as good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 34 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: eunice from prestonsburg, KY

Lid closing to far bumpers missing and fuse block cracked

unhooked power plug removed 2 top screws tilted topfront panel back removed cracked fuse holder replaced with new fuse holder put top cover back on installed 2 top screws plugged in power cord done!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Washer Lid Bumper
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Peter from Pacific Palisades, CA

Washing machine lid kept banging shut and rattled when the clothes were being washed.

I was only missing one of the bumpers but that was in pretty poor shape so I replaced them both. It didn't take much to do. Just pressed the bumper into place and Viola! instant gratification.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3