Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738863
This timer knob spring is almost an inch and a half long, and is not quite an inch in diameter. It is made of metal and is used with the timer knobs of both washers and dryers.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I received the part next day, just as promised. I removed two screws to take the top panel off the washer, removed the two screws on the old timer and put the new timer in. Had the repair done withing 15 minutes - I have replaced this before, I am 54.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Remove cap on the knob, remove clip under the cap. Pull off the knob and bezel. Remove four screws on top of the control panel tip panel forward & remove timer screws. Disconect wiring plug from old timer. Very simple operation.
Lost Timer knob retaining clip & spring when I removed it before ordering. Put spring on, then knob then retaining clip. Problem solved.
Removed face panel, unpluged timmer, removed timer securing bolts, bolted in place replacement time, connected wires, replaced face panel.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.