Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738843
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
A very easy fix. Just remove the timer's knob and skirt, remove the 3 screws on top of the control panel. Slide the panel forward to expose the timer, unplug the wiring harness, slide out the old timer, install the new timer, skirt and knob, plug in the harness, put the control panel in place, install the 3 screws, and you are finished. It took about 15 minutes...
Help other customers find the most helpful instructions.
Were these instructions helpful?
well i used a couple of ball point pens to push the knob retainers together so the knob would pull off then simply pushed the new knob and skirt i purchaced from parts select . their prices and people were great i highly recommend them and will use them again for any other parts i might need in the future thanks guys Brian Halsey Oregon
I had to drill and strap a piece of strapping iron on because the new timer had a broken tab on it.
Removed top and front compartment and removed timer and motor , timer is a push-in type on the top panel , motor was removed by removal of the belt and screws and and wiring harness, about 30 minutes and 30 minutes to install motor,belt and timer.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.