Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
JUDITH H - June 14, 2018
Verified Purchase
Part for Maytag washing machine
Hi, Picked the right part and fixed my Maytag. 70.00 was sure cheaper than replacing a stacker. ??
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
September 26, 2017
Hi there, my washing machine will fill and then stops completely. It will not agitate, spin, or pump water out. I checked the electrical circuit to the switch at the harness and got current with the orange and pink wires but not the black and white. Do you think replacing the switch with the power control lid switch ps11738802 will fix the problem?
For model number Maytag LSG7806AAE
Hi Lisa,
Thank you for your inquiry. If your washer is stopping after it has filled with water there are some parts that you will need to check to see which one is causing the issue. You will need to check the lid switch and actuator, the door catch and strike, the start switch and the timer, the knobs and the drive motor. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Linda
December 10, 2018
Washer won’t start unless I slam the lid. Otherwise works fine. What part do I need?
For model number LSE7806ACE
Hello Linda, Thank you for the question. This sounds like an issue with the Lid Switch assembly, PartSelect Number PS2003101 or one of the switches inside the assembly. I suggest testing the switches to see if there is damage or if the push button on them stick. Hope this helps, good luck with this repair!
Could someone plz tell me where at on machine i can see the safety lid switch. I see its number 17 on diagram but location seems to evade me.This is a washer dryer combo. Thank you
For model number LSE7804ACE
Hi Lashaun, thank you for your question. This part should be located either at the back of underneath the lid but most of the time it is located underneath the timer in the control panel area. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Norma Caldwell
May 23, 2019
Need switch for fan, help
For model number Jenn-air 1990model. Where can I find #?
Hello Norma, thank you for contacting us. We do need the model number to match parts to units. Here is a link to some tips on our website for locating your model number. https://www.partselect.ca/Model-Number-Locator+1+repair.htm. We hope you find this helpful.
Was this helpful?
Thank you for voting!
Roger
October 26, 2023
I turned on washer and it started filling water. I raised lid to add detergent and it stopped filling as it is supposed. When I closed lid it did not continue to fill. Nothing on the washer works including spin etc. Dryer has power and is fine. Thanks
For model number Maytag LSE7806ACE
Hello Roger, thank you for your inquiry. According to our research, we would recommend checking the lid switch assembly, part number PS11738802, to fix the issue. It prevents the washer from spinning or agitating when the lid is open. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
