Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738777
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I replaced the entire timer assembly as follows:1. Unplugged the washerRemoved the cover from the middle of the washer timer knob, using a small screwdriver. The cover is held in by a friction fit, so it can be pried loose easily. This exposed the retainer clip2. Removed the retainer clip, and pulled the knob and spring off. I placed the clip, knob, knob cover, bezel (indicator dial) and spring separately in a box3. Removed the two outer screws on the top of the contral panel assembly. This allowe me to pull the face plate off and lay it on a towel (to prevent scratching) on top of the washer. All the wiring stayed connected.4. On the front of the face plate, I removed two screws that held the timer assembly in place.5. I removed the timer assembly (leaving the wires connected) and put the new on in its place.6. I inserted and tightened the 2 screws holding the timer to the control panel face plate.7. One by one, I transferred the wires from the old timer assembly to the new one, putting each in its corresponding place. They were spade/lug type connections and only required pulling off and pushing on8. I put the front panel back on and inserted and tightened the two screws that held it.9. I replaced the bezel/indicator, spring, and knob, reinstalling the retainer clip to hold the knob on10. I replaced the knob cover, pressing it into place.
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.