Quick Question!

Have you ever purchased from PartSelect.com before?

11738705-1-S-Whirlpool-WP18776-Front Top Lock
11738705-1-S-Whirlpool-WP18776-Front Top Lock 11738705-2-S-Whirlpool-WP18776-Front Top Lock 11738705-3-S-Whirlpool-WP18776-Front Top Lock http://www.partselect.com/Schematics/Maytag/UTGT4VNQ.gif

Front Top Lock

PartSelect Number PS11738705

This part is used to secure the top panel to the cabinet. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$6.97

You Save

$1.16

Your Price

$5.81
Order within the next 1 hr and 55 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 4 reviews What's this?
1-4 of 4
 

10 of 21 people found this instruction helpful

Parts Used:
  • Front Top Lock
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Mark from Huntington Station, NY

Broken clip on top panel hold down

pressed clip into hole on top of front panel. first remove two philip screws that hold filter so you can lift top up.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Larry from Bethpage, NY

Dryer would not turn on

Found the switch part on the floor and after I figured out where it came from it was minutes before it took to find the web site and order the part, I then watched the installation video which helped with a few pointers and days later it was installed and fixed for 10 dollars with shipping,AMAZING!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Socket set, Wrench set
Customer: James from COTTONWOOD, CA

Motor failure

Used this resource and others' advice -thank you . Make sure to disconnect power first. I had replaced the rollers and tensioner a week earlier due to squeaking, but mine was the rare one where squeaking meant motor failure, so I had to place another parts order. The dryer was 19 years old, and my blower wheel did not simply 'unscrew with reverse threads'. During removal the blower wheel's plastic deformed, so had to do like someone else did and cut the rear shaft with a reciprocating saw. Just be careful not to damage the bulkhead's built-in bracket that anchors the rear of the motor. I think it was a 13/16" wrench that fit the blower wheel and I forget the size for the pulley nut on the front of the motor, but I suggest a deep socket since it held well. My best advice when dealing with a motor replacement is to ensure the blower wheel wheel will separate successfully from the motor before placing your parts order should it be a stubborn removal. Good luck.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools:
Customer: William D. from LUVERNE, AL

Broken dryer belt

Speaking on my husbands' behalf, the belt was easy to replace with the helpful instructions provided. I am also enjoying the new lint filter that we also purchased. He is so glad he found your website and was able to replace the dryers parts with no problem. The delivery was fast which really helped me out, since I wash and dry clothes almost daily. Thank-you for having just what we needed to get our dryer running again!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4