Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/31667.gif
See part 91 in the diagram
http://www.partselect.com/Schematics/Maytag/31667.gif

Refrigerator Door Gasket

PartSelect Number PS11738523

This fresh food door gasket is white and made of rubber. It measures approximately thirty-one and a half inches wide by forty-one and a half inches long.

This part works with the following brands: Amana.

This part works with the following products: Refrigerator.

This part fixes the following symptoms:

  • Door Sweating.
  • Fridge runs too long.
  • Fridge too warm.
  • Leaking.
  • Door won’t open or close.

Compare At

$132.95

You Save

$22.16

Your Price

$110.79
Order within the next 11 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 18 reviews What's this?
16-18 of 18
 

1 of 2 people found this instruction helpful

Parts Used:
  • Refrigerator Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Effian from LAYTON, UT

Has to remove the panel of the fridge door

It was not difficult it took a lot of time to remove the panel by removing like 20 bolts around it. Put the panel down on the floor face down then wrap the gasket around it. Putting back the panel on the door you can use some help to hold it up, while you are screwing back all those bolts. After screwing the upper bolts of the panel, you better go down at the bottom and start working on it, because the gasket tends to fall off at the bottom part. Then you can screw all the rest of the bolts. That's how you do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
  • Refrigerator Door Gasket
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Martin from Alsip, IL

Gasket was ripped and hanging off of door

I unscrewed about 32 screws with a nutdriver,removed door shelving while leaving door attached to fridge.Replaced old gasket with new one,used a hair dryer to get wrinkles out from shipping.Installed onto door,fit perfectly!.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Harry from Seminole, FL

Fridge gasket leaking; freezer tray broken tab; icemaker tube leaking

Fridge Gasket - heated the gasket with hairdrier to reform shape from shipping. Tried loostening nuts all around, but when installing the top part first, had to remove the nuts in order to have sufficient space to install gasket. Then tightened top nuts, and proceeded to install side parts, removing the nuts as I went down. Once about half down, was able to finish installation without removing any more nuts - loosening was enough.
Freezer tray - just slide it in. The only concern was the part deminsions were not correct. They showed the tray to be about 15", while my old tray was about 12". But when the tray arrived I was thankful that the new one matched the old one - 12". The diragram needs to be corrected.
Icemaker tube - no problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-18 of 18