This fresh food door gasket is white and made of rubber. It measures approximately thirty-one and a half inches wide by forty-one and a half inches long.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door Sweating | Fridge runs too long | Fridge too warm | Leaking
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David B - July 23, 2021
Verified Purchase
Refrigerator gasket for Amana refrigerator
Part fit perfectly. Easy repair
★★★★★
★★★★★
Anthony L - June 15, 2020
Verified Purchase
Very easy to install.
Awesome quality, very happy with the product.
★★★★★
★★★★★
Leslie B - April 24, 2020
Verified Purchase
Easy fix
Part arrived in great condition was easy to install and solved the problem it was ordered for.
★★★★★
★★★★★
Sidney W - March 3, 2020
Verified Purchase
Great for my old Amana fridge.
Refrigerator gasket. Easier than I thought. Parts people (P.P.) fast. Thanks!
★★★★★
★★★★★
Kevin C - January 28, 2019
Verified Purchase
Works great
Very well packaged product went right on just as it should no problems whatsoever highly recommend
★★★★★
★★★★★
Howard K - October 30, 2018
Verified Purchase
Easy repair.
The gasket fit perfectly. The problem of air leaking into the refrigerator is solved. No more condensation on the shelves and containers.
★★★★★
★★★★★
Gary H - October 26, 2018
Verified Purchase
easy repair gasket was the exact part needed.
Part went on as expected. You need to take your time and make sure everything is lined up right and then tighten all screws. Very satisfied.
★★★★★
★★★★★
Michael L - April 2, 2018
Verified Purchase
I haven't installed it yet, but it looks simple enough.
The part was actually a bit better than expected. I've let it sit flat for a few days and it seems to be taking it's normal shape.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 20 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bad gasket with large open gap
Take off freezer door to take off refrigerator door. Once fridge door off, put freezer door back on, lightly screw in place. Lay fridge door down flat on table. Take out all screws. Put new gasket in, while putting a few screws in to hold in place. Screw down. Use blow dryer to help get any kinks out. Easier than I thought it would be. I
... Read morethink my door is a little warped, but the gasket was enough to make it seal. No more condensation, and the fridge isn’t running all the time. Thanks parts people! Haha.
Read less
Sidney from Tallahassee, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Not really a problem!
My brother just didn't listen and was doing it the hard way until a friend of mine looked it up on U-Tube and then it went pretty smooth. Lol So my advice is to look it up on U-Tube before you begin!!
It was not difficult it took a lot of time to remove the panel by removing like 20 bolts around it. Put the panel down on the floor face down then wrap the gasket around it. Putting back the panel on the door you can use some help to hold it up, while you are screwing back all those bolts. After screwing the upper bolts of the panel, you
... Read morebetter go down at the bottom and start working on it, because the gasket tends to fall off at the bottom part. Then you can screw all the rest of the bolts. That's how you do it.
Read less
Effian from LAYTON, UT
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
gasket was ripped and hanging off of door
I unscrewed about 32 screws with a nutdriver,removed door shelving while leaving door attached to fridge.Replaced old gasket with new one,used a hair dryer to get wrinkles out from shipping.Installed onto door,fit perfectly!.
Martin from Alsip, IL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
could not get seal under face plate
Ended up taking the inner face plate off, putting gasket around it and then repaced to ref/freezer.
Fridge Gasket - heated the gasket with hairdrier to reform shape from shipping. Tried loostening nuts all around, but when installing the top part first, had to remove the nuts in order to have sufficient space to install gasket. Then tightened top nuts, and proceeded to install side parts, removing the nuts as I went down. Once about hal
... Read moref down, was able to finish installation without removing any more nuts - loosening was enough. Freezer tray - just slide it in. The only concern was the part deminsions were not correct. They showed the tray to be about 15", while my old tray was about 12". But when the tray arrived I was thankful that the new one matched the old one - 12". The diragram needs to be corrected. Icemaker tube - no problems.
First I read other repair stories which really helped. I decided to leave the door on and use a 1/4" nutdriver plus a flat blade screwdriver. I loosed the screws on one side at a time. I pulled off the old seal and replaced with the new, using the flat blade to help tuck the seal in as needed. I also had to use a hair dryer to soften the
... Read more new seal at some places in order to form it properly. Overall, I had great success!
Read less
William from Brooklyn, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
14 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator door gasket would not seal
First removed door, then removed all screws, then removed inside door panel, then removed old gasket, then installed new gasket, then reattached inside door panel and all screws, then reattached door, then used hair dryer to get gasket to seal in several areas.
David from Bethel Park, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old gasket was leaking
Took door off, and put on saw horses. Loosen (don't remove) screws. Remove old gasket, put new one one, and tighten screws. Put door back on.
Gary from Oak Creek, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old gasket had become worn and torn...
Pulled out old gasket. Removed inner door molding then fixed new gasket around the edges. Replaced screws around entire inner door and snugged gasket into place. Unfortunately, it seems that the new gasket's magnets were not so strong and the door tends to pop open easily. I suppose it is better than it was...we'll need to keep an e
... Read moreye on it and perhaps get a manual latch of some sort....
Read less
Brett from De Pere, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
September 27, 2017
I need both seals freezer and fridge does this part(s) cover the bases
For model number TP22R3L
Hi Joe,
Thank you for your inquiry. The gaskets for the refrigerator and freezer sections have different part numbers. The part number for the refrigerator door gasket is PS11738523 and the part number for the freezer door gasket is PS11738524. I hope this helps. Thank you and have a great day!
8 people found this helpful.
Was this helpful?
Thank you for voting!
David
September 26, 2019
Water is accumulating under the two crispers, and droplets hang from the roof of the fridge compartment. This water has to be removed daily, and i wish to know whether a leaking gasket on the fridge door is contributing to the water build-up.
For model number DRT2102AW (Amana Distinctions)
Hi David, it is possible this is caused by a faulty gasket or even bent fridge door hinge. There could also be leaking water lines. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mahmoud
July 16, 2019
Hi,
I need both fridge and freezer door gasket for this model.What would be the part # ?
For model number Amana TXI21A3W
Hello Mahmoud, thank you for inquiring. For your model the Freezer Door Gasket is part PS11738524 and the Refrigerator Door Gasket is this part PS11738523.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joan
September 30, 2021
The model number is for Amana Refrigerator. I need to replace the door gasket on the refrigerator section. What will work? Thank you, Joan
For model number TQ1BR2W
Hello Joan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738521. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
I need gaskets for the refrigerator door and the freezer compartment
For model number TX121RL
Hello Charles, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11738523 for the White Fresh Food Door Gasket. The Freezer Gasket PartSelect Number PS2007704 is showing to be discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with the updated substitution number. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
