Quick Question!

Have you ever purchased from PartSelect.com before?

11738522-1-S-Whirlpool-WP12550110Q-Freezer Door Gasket
11738522-1-S-Whirlpool-WP12550110Q-Freezer Door Gasket 11738522-2-S-Whirlpool-WP12550110Q-Freezer Door Gasket 11738522-3-S-Whirlpool-WP12550110Q-Freezer Door Gasket http://www.partselect.com/Schematics/Maytag/22665.gif

Freezer Door Gasket

PartSelect Number PS11738522

This white door gasket is used to seal the freezer door when closed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door Sweating.

Compare At

$104.83

You Save

$17.47

Your Price

$87.36
Order within the next 9 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

5 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver
Customer: patrick from st petersburg, FL

Replace moldy gaskets on doors

It was a complete mess and a failure. There were no in structions with the gaskets except warming them in water to streatch them. Nothing with a photo of what the gasket looks like as it is being installed or after installation. I am still not convinced they are the correct gaskets for the model. It was a total waste of time and $130.00 to try to replace the gaskets. In the end, I determined that it would be cheaper in the long run to buy a used refrigerator than to mess with the gaskets.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Freezer Door Gasket
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Socket set
Customer: Wayne from Belle Haven, VA

Gasket was off on the bottom

Trial and error. IT would have been nice to have instructions with the part. Tried to install the gasket withour completely removing the frame. Wasn't happening. Finally removed the frame and repair went fairly well.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: DAVID from LANCASTER, PA

Magnetic door seals falling apart

First, I removed everything from the door shelves. Next, I loosened the screws around the door, under the seals, pulled the seals out and slid the new ones into place. It couldn't have been easier. There is no need to remove the door liner. It's like having a new refrigerator.


I was surprised, when my parts arrived 3 days after I ordered them. The cost was less than half, compared to our local parts house.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers
Customer: ROBERT from SEEKONK, MA

Replace both door gasgets

did not remove the doors. did freezer first ,removed inner door planel install gasget on panel and reinstalled. the aloney problem i had was trying to resape the door gasget on the big door. which is still a little out of shape hopeing it will fall in line over time.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4