Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738307
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
lift out old (broken) crisper drawer cover, replace with new. Replace glass shelf. Took longer to clean the shelf off then it took to replace.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I slid out the crisper drawer, then lifted out the cracked drawer cover, removed glass panel from it and then replaced the cover with the new part. After installing, I replaced the glass panel in the top and slid in my crisper drawer. It took less than 5 mintues and works perfect!Thanks Parts Select for helping me select the correct part!
just replaced the frame - easy to remove old broken frame and replace with new one
I removed the crisper drawer cover and took out the glass and put it in the new drawer cover. The freezer support shelf had been missing for a while. All it needed was the shelf suuport that slid down over the stud in the freezer wall. Couldn't be simpler! No tools needed.
Following the diagram of parts so that I could order the right items was the most difficult part of the job. The web site for this task needs to be more friendly.
Followed instructions on the video, easier DONE than said.
took out old broken frame! popped out glass! put in new frame inserted glass done! no tools required! took less than 5 minutes! good as new!
Removed the old crisper drawer cover and glass and chrome edges, then the old support stud after reading on Internet to twist it to remove, inserted new Shelf Support Stud and twisted in. Replaced the new Drawer Cover with old chrome trims and old glass. Done there. Went to freezer and removed old Ice door since one hinge tab was broken. Inserted new Ice Door tabs and snapped into place. Now like new fridge and happy wife....
replaced drawer cover----used pliers to twist stud into side of refrigerator
My main rave for this site is I received my parts in less than 24 hours!! I was shocked at how fast they arrived ( I didn't pay for overnight shipping either)The repair was simple. Pulled out the old broken covers, put in the new ones and slid the drawers back in. Sure is nice to have them seal again! :)
Removed old cover and installled new cover. Piece of cake!!
Just had to remove the glass and remove the old drawer cover and pop in the new one. What was great is the part showed up 2 days after ordering FedEx Ground. The wife was very happy. Thanks
Extremely simple. Remove items on shelf. Move glass from old cover to new cover. Replace cover and drawer.
nothing to do,just lift the frame and place the new one.
My crisper drawer wasn't attached so I first removed the glass shelf and the old crisper drawer cover. I then turned the old cover over and removed the rubber strip that acts as a buffer--protector between the drawer and the cover. I placed the strip on the new drawer cover, put the crisper cover on the appropriate pegs, placed the glass shelf into the cover and slid the crisper drawer into the slots. I wish all repairs were this easy.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.