Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738212
This almond refrigerator door handle is just over eighteen inches long. ***Please Note*** If the hinges are on the left side of your refrigerator, then this handle becomes the freezer door handle. Made mostly of plastic, but also of a little metal, this handle has a strip of metal up one side for decoration.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
The part was delivered in just a few days. We merely had to unscrew the broken handle and screw in the new one. The color matched wonderfully and funcitoned beautifully.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Unscrewed the old handles and replaced the new handles with the same screws... that easy! It was the easiest repair that I ever had to do.
First I removed the two screws that held the top of the handle in place. Then popped off the bottom holder. Replaced the broken handle with the new one, replaced the screws and snap on section and now have a nice looking refirigerator with a handle that works.
Took out three screws, kept the little plastic cover on the bottom screws and the screws--they did not come with the new handle. It took less than 5 minutes to do the whole job and while it was off I got to really clean my frig. Thanks for the quick delivery!!
Despite a long delay due to a lack of stock on hand, the correct part arrived and matched in color. It came without the little rectangular plastic cap or cover for the bottom bolt, so it was good to have kept the old handle and plastic cap on hand. I imagine other owners might have thrown out a broken part, bolts and cap in the meantime. Strictly the handle arrived, but it was easy to install. I'm grateful for a part I wasn't sure could be found.
Removed a small cover plug on the lower portion of the handle, removed three screws. Took off old handle, positioned the new one, replaced the screws and cover plug and that was it! Wouldn't have taken even 15 minutes if I hadn't dropped a screw and had to search for it - lol.
Removed the old. Took off the name plate from the old handle. Put the name plate on the new. Installed new handle.
After popping off the lower cover all I needed was a screwdriver to remove both the upper 2 screws and the lower screw. The new handle was attached in seconds and it matches great.
Removed the plastic cover cap on side screw the removed the three screws, removing the old handle. Cleaned screws and mounting area on door, then installed the new handle. Very easy.
Easiest repair ever. Just unscrewed 3 screws and replaced with new handle.
the fed-ex delivered the part on Tuesday morning I got the part and put it on in less than five minutesThe part matched the frig perfectly. How do you know what color my frig was since you didn't ask me what color it was? Anyway it looks just like new. Thanks parts department.
Removed 3 screws and removed broken handle. Installed new handle and replaced screws. The repair was very simple.
I unscrewed the two screws at the top. Popped off the side cover and unscrewed that screw. Put the new handle in place and screwed in the screws.Job complete!!!!
Removed the old handle and the new one fit like a glove.
Removed 3 screwsRemoved broken handleInstalled new handleInstalled 3 screwsDoneI received part in less than 24 hours
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.