Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738134
NOTE: This part has been updated by the manufacture and now includes both left and right side.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I removed the pantry drawer, removed the pantry end cap and replaced it with the new part. The only thing that took a little thinking was detaching and reattaching the temperature control slider.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Followed the diagram and other people's comments. A bit of trouble with the sliding part, but otherwise very simple to change out.
I removed the vegetable drawers and glass. Removed the deli drawer and glass. I then used a small nutdriver to remove the small hexhead screw. Once removed I unscrewed the metal slider and screwed it to the new part. I screwed the new part in where I removed the old one. It was pretty easy. I just wish they made that part that breaks off so easily out of metal. I am frustrated by the number of times I need to replace it. PartSelect is great at delivering the part fast.
pulled out both crisper drawers, removed panrty drawer, removed drawer slide screws, removed right pantry end cap, gently removed temperature selecture slide assembly, then worked backewards from there with the new part. Not bad very easy,
Repair was easy. I removed the food from tha refer and backed out four screws that help end cap in place. I replaced part and screwed it back in using a little locltite on the screws so they didn't work their way out. I then snapped the cover back onto the hinge points and put the food back in the refrigerator. Done
It literally took 5 mins. Remove the crisper drawers and pantry drawer for ease of access. Remove the 3 screws holding the end cap in place. Remove the glide from the old endcap and reattach it to the new part. Remove the humidity control arm from the old endcap and reattach to the new part (hardest part of the job - just takes a little finesse). Reinstall the new endcap and the drawers.
Actually, my daughter---who is much more mechanically-minded than I---did it. We had to borrow the socket set from a friend. It was relatively simple to do. Of course, the 'fix' led to needing to clean the 'fridge, so that really took the most effort!Important to note here: THE QUICK RESPONSE OF PARTSELECT IN GETTING THE PARTS TO ME QUICKLY WAS AMAZING!!!
This was easy because I looked at other repair stories. What nobody mentioned is don't be afraid to swing the temperature control slider around after you get all the screws out. It just sort of hooks into a notch in the back of the cabinet. Pull the whole "L" toward you on a 90 degree swing and it will slip out. Then you can take it out and jiggle the rest of the parts to exchange them Also, if you have the screwdriver with the interchangeable tips you also have the nut driver you need. I was disappointed because I thought I would surprise my husband by doing it myself but didn't have a nut driver. Then I thought of the holder for the screwdriver tips and it was a perfect fit! Surprise.
Remove the two vegi drawers on the bottom.Remove the glass covering for the top of "deli-drawer".Remove the entire Deli drawer from the glides and put aside. Remove the broken side using the nut driver (3 screws)Transfer the drawer glides from broken part to new part (2 screws).Put back the new plastic side and re attache to side of frig (3 screws, again).Put back the drawer in the glides, works like an office file drawer with "clips" on the end.Your done. My kids could do it. All of the time is spent removing the "stuff" and cleaning all the "yuck" that you find once you remove the bottom drawer. Un screwing and re attaching 5 screws takes less then 2 minutes. Quit thinking about this and save yourself 100$ by NOT calling a repair guy.
removed the 2 fruit & vegtable bins, glass shelf then 2 nuts from the end cap. Instaled the new end cap and rest of stuff in less than 15 min. worked great ..
Literally removed two screws from the old unit, removed the humidity control from the old unit and put in on the new unit. Put the two screws back in and put the lid back on.Your service saved us over $100 in a service call to get the unit repaired. The information from other people doing the same repair was valuable information. Thanks
I took out the pantry drawer, the drawer slide on the left side (2 screws), then the broken pantry end cap (three screws). Just to be sure I pulled out both crisper drawers so as not to damage those in the process. The new part matched up perfectly and all went back into place easily. I would recommend that anybody can do this repair. Easy squeezy!!
Having done it once before this time it went fairly easily.....there were NO instructions so one needs to take NOTE as you UNDO the broken side piece so you can reverse it as you put the new one in.Hopefully this won't happen again!! Part came in the mail within 2 DAYS OF ORDERING ! that was nice!
Removed the drawers, glass shelf, removed the three screws with a small socket set then took out broken part. I needed to unsnap some attached slide parts after removing the assembly. Attached removed parts from the old side piece to the new side part and replace the screwws initially removed. Then I snapped the shelf flip cover into the the new right and old left side. It is good as new now. It was quite easy once I figured out how to remove the sliding parts. It took more time to clean the shelf and bootom of the drawers than it did to replace the part.
I removed the drawers (3 in all) plus the glass shelve. Next I removed two screws from side fixture and bracket that is attached to the back and installed into the new end cap assembly. Finally re-installed fixture with the 2 screws, inserted the glass shelve and 3 drawers. Also, great time to wipe inside of frig. with a wash cloth. This is the second time we've had to replace due to our dropping heavy items on the hinged area causing the hinge pin to break. Need to be more careful. It takes a 1/4 inch nut driver to remove the two screws.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.