Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11738134
NOTE: This part has been updated by the manufacture and now includes both left and right side.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
removed the two veggie draws, then the glass top, then the pantry draw...remove three screws. remove the temp adjustment lever and install on new end cap. install end cap and draws etc...took about 15 min.
Help other customers find the most helpful instructions.
Were these instructions helpful?
had to take out three screws on the end cap and two on the bracket. Had to move a part over from the broken one. None of which were difficult.
Following the excellent schematic on your site, I disassembled the RH drawer hardware and removed the damaged end cap, installed the new end cap, and re-assembled the drawer hardware.The replacement part was delivered before I expected it and the schematic was accurate and very helpful. Well done, PartSelect, thanks.
Direct part replacement. Very easy. Most importantly take your time. When ordering parts review drawings. Screws don't come with parts so save screws when taking it apart.
First. remove the two drawers and the glass shelf above them. Then using a hex socket remove the two hex head screws that hold the parts to the side of the fridge. Remove the metal drawer slides from the old part and apply them to the new part. If you are installing the left bracket reattach it to the fridge. If you are replacing the right side add the following steps. After attaching the slide to the new part remove the temp control assembly from the old part paying attention to how it fits together. Transfer to new part. Reattach new part to fridge. Carefully reattach pantry door to spindles. The hardest part was taking the temp control off of the old part and putting on the new part. I had made at least 5 calls to the store where I had purchased the refrigerator but I couldn't get them out to repair it. I decided to do it myself and I'm glad I did. It probably saved me at least $50.
First let me tell you that I have never ordered a part on a Friday and received it the next day, Saturday at 9:30am...I was shocked and so was my wife. You have a customer for life...Removed the two crisper baskets and the glass shelf. Then I just removed the 3 screws that held the part on, placed the new part in postion and screwed it back on...The part came perfect and the fix was so easy...Thank you again for the prompt service...You are the BEST!!!!Lenny and Ronnie Lichtenstein
Removed vegetable drawers, glass top and two metal guards. Unhook clips on deli drawer slide brackets, then removed drawer. Removed two 5/16 hex head screws, unsnapped temp controlbracket at rear of ref. Removed end cap & temp bar. Removed slide, 2 - 5/16 hex head screws hold this on and temp control from old part, which unsnaps. Install these on new part. Reassemble end cap in frig. and all drawers as removed. Set Temp control to desired temp. I think this tab should be made of a more heavier material, as you can see this part breaks quite frequently.
Removed the vegetable drawers, then the glass shelf over the pantry drawer, removed the pantry drawer to expose the right hand end cap. Removed the end cap and removed the moisture control mechanism, re-attached the moisture control mechanism to the new end cap, replaced the end cap, shelf and drawers. The hardest part was figuring out how to remove the moisture control mechanism from the old end cap. You have to slide it to the back of the end cap to pop it loose from the end cap, rotate the mechanism to allow the actuator to be removed from the moisture control thumb slide.
After removing the shelving in the refrigerator to access the pantry slide out panel I removed the metal sliding rails that the pantry drawer rides on and put them aside. I then used s 1/4" hex socket screw driver and removed the 3 screws holding the part in place. After wiping the area of any moisture from the humidity on the plastic I screwed the new part in place and then attached the sliding rails and replaced all the draws I had removed ealier. Total time was no more than 15 minutes!
Removed the drawers, unscrewed 3 screws, positioned the new part, done. Very easy.
Ordering the part was easy. Part came in a few days. I was able to install the part in a little over 15 minutes. Used a 1/4 inch nut driver. Three screws . Done! Happy wife!
My wife said it was the wrong part before I opened the package. I took out what was in the way and put in what was in the package and everybody is happy. Dat's Dat from da Who Dat Nation!
Replaced Lesf side Pantry End cap. Directions on web site easy to understand.
Removed crisper drawers, removed glass and rails, unscrewed side part and replaced
Simple- I removed the food, drawers, and shelving from the unit. I unscrewed the 2 screws holding the end cap on. Once removed I also separated the sliding track from the old part and put it on the new part. I then screwed the new end cap into place using the same screws as the old one. I put the shelves, drawers, and the food back in. All in less than 10 minutes.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.