Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace infinite switch in badly-stuck cooktop over 10 years old.
After many years of use by average families, the cooktop was firmly adhered to the countertop by kitchen contaminates (mostly dried grease) that entrained between the cooktop and the countertop.
Popping it loose with my geezerly muscles was hopeless, so I took 2 pieces of 3/4" plywood to spread psi (at the bottom of the cooktop
... Read more and at the top of the shelf below it), plus a 2 X 4 stud and more plywood as shims... placing in-between that plywood; a scissor jack from my pickup truck.
Locating this assembly to apply force at one end of the cooktop minimized the stress at the adhesion on the countertop. Results were no problem and no damage, in this case, in breaking the adhesion.
After that, a 1/4" nut driver did the loosening and tightening. A magnetic #2 Phillips screwdriver did the sheet-metal screw starting. A slot screwdriver was used to loosen the electrical connectors at both ends.
The repair was trivial; most of my time was spent in investigation, part acquisition, and setup. Here's hoping the above might cut your losses in that regard.
Read less
Joe from RICHLAND, WA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
January 11, 2022
For whirlpool range
Which infinite switch controls the front right burner(the largest burner) ? It seems it is not correctly controlling the temperature. It always stays on high heat even when we have it turned down to very low heat. Thank you.
For model number W5CE3024XB00
Hello David, Thank you for your inquiry. We have checked the model number you have provided and show the switch for the right front burner as PS11750949. We hope this helps and hope to hear back from you soon.
Which infinite switch do I need for the right front 10 inch burner?
For model number W5ce3024xb00
Hello Cedrick, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PS11750949. We hope this is helpful.
Hello, I am looking for the infinite switch for the right front (largest) burner. It stays on high most of the time. Thank you.
For model number W5CE3024XS00
Hi Jason, thank you for reaching out. The infinite switch for the right front burner is part number PS11750949. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!