Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11731155
This temperature sensor detects the temperature within the oven cavity.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
1. Flip "OFF" circuit breaker.2. Pull out range unit from wall.3. Unplug range unit.4. On the back of the range unit, remove 4 screws holding lower rear cover using a phillips head screwdriver.5. Remove lower rear cover.6. Unplug temperature sensor connector (1 wire connector located upper right section behind oven). 7. From inside oven (upper left, back corner), remove 2 screws holding temperature sensor unit using a Phillips head screwdriver.8. Remove old temperature sensor unit.9. Insert new temperature sensor unit (wire connector end first) through opening and secure reusing old screws.10. Re-connect temperature sensor connector.11. Re-attach and secure lower rear cover reusing 4 old screws.12. Plug in range unit.13. Move range unit back to desired location.14. Flip "ON" circuit breaker.
Help other customers find the most helpful instructions.
Were these instructions helpful?
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.