Quick Question!

Have you ever purchased from PartSelect.com before?

11729115-1-S-GE-WB27X26081-MAGNETRON
11729115-1-S-GE-WB27X26081-MAGNETRON 11729115-2-S-GE-WB27X26081-MAGNETRON 11729115-3-S-GE-WB27X26081-MAGNETRON http://www.partselect.com/Schematics/GE/00106785i01.gif

MAGNETRON

PartSelect Number PS11729115

This part is used to generate microwave energy/heat.

This part works with the following brands: GE, Hotpoint & KENMORE®.

This part fixes the following symptoms:

  • No heat.

Compare At

$116.18

You Save

$19.36

Your Price

$96.82
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

43 of 70 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Michael from Coulterville, CA

No power to microwave, no heating.

Unpluged power cord!! Removed front control panel to expose electronics (need to remove top horizontal vent cover to expose mounting hardware). Unplugged leads to control panel board. Removed magnetron with Tstat (3- phillip heads, need stubby). Installed new parts and control panel, plugged it in tested. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • MAGNETRON
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Aaron from BLUE RIDGE, TX

Microwave function not working

1) Removed 4 screws securing the microwave to the cabinet.2) Slid microwave out, unplugged and placed on a work surface that allowed lower trim to hang over. 3a) Removed two screws and removed the cover on top of the oven. 3b) Unplugged high voltage plug from Magnatron. 4) Removed wires from overtemp fuse mounted to Magnatron. 5) Removed the four screws securing the Magnatron to the oven. 6) Removed Manatron. It's a tight fit, but can be done without removing anything else. 7) Replaced Magnatron. This is where I needed the magnetic part retrieval tool. The nature of a Magnatron is the use of strong magnets surrounding the tube. Getting the four screws back into place wasn't possible with just a normal magnetic screwdriver tip. I used the retrieval tool to position the screws back in place. Be sure to not initially tighten any screw completely, until they can be evenly tightened. This ensures correct compression/seating of the shielding material near the neck of the tube. 8) Reverse removal steps. Plugged in and tested microwave function on a cup of tap water. 9) Reinstated in cabinet and got a big thank you kiss from the wife!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2