Quick Question!

Have you ever purchased from PartSelect.com before?

11728387-1-S-Frigidaire-5304503436-CONTROL-ELECTRICAL
11728387-1-S-Frigidaire-5304503436-CONTROL-ELECTRICAL 11728387-2-S-Frigidaire-5304503436-CONTROL-ELECTRICAL 11728387-3-S-Frigidaire-5304503436-CONTROL-ELECTRICAL http://www.partselect.com/Schematics/Frigidaire/B8JV66IP.gif

CONTROL-ELECTRICAL

PartSelect Number PS11728387

This part helps maintain a constant temperature within the appliance.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

This part fixes the following symptoms:

  • Too warm.

Compare At

$41.23

You Save

$6.87

Your Price

$34.36
Order within the next 12 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 2 reviews What's this?
1-2 of 2
 

19 of 24 people found this instruction helpful

Parts Used:
  • CONTROL-ELECTRICAL
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: WILLIAM from URBANA, OH

Freezer would run then thaw then freeze. Tap on the control knob, it would start running again

Easy fix. I unplugged the freezer, unload items in freezer. took out shelves and baskets, Pulled off the control knob then removed all screws. removed inside panel, replaced part exactly as I took out old part. Put the panel back on, put everything back in place. Plugged freezer back in and turned the knob to 3. Let freezer run for a day to see if I ordered the correct part. Problem is fixed. Thank you, PartSelect for making it so easy to find, order the correct part and for all the customers input to make the repair easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

15 of 20 people found this instruction helpful

Parts Used:
  • CONTROL-ELECTRICAL
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: john from hurst, TX

Freezer compressor ran continuously and freezer getting colder and colder.

Repair was quick and easy. I removed the frozen food in the bottom so the back panel could be removed. The temperature comtrol is attached to the back of that panel. It has a metal wire with a capillary tube on the end to sense the temperature. I just installed it exactly like the old one came out. Be sure and don't get the wires mixed up. Sometimes it helps to make notes. This was also a good time to clean the bottom out and make sure the drain hole was clear.

It took two days for the temperature to stabilize. I was anxious for a couple days that there was something else wrong. However, it smoothed out and the temperature control (thermostat) is now working properly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2