Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11726733
This kit includes the 8 wheels and 8 axles.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
I ordered a new wheel - from another company - and it was fine - but it didn't come with the axle. So I ordered both from you and it worked just fine. Thanks so much.
Help other customers find the most helpful instructions.
Were these instructions helpful?
removed the rack and snapped the 4 week/axle assemblies on rack by hand pressure returned rack to track.
New wheels were inserted in place.
I ordered the replacement wheels and axels. I popped the axels into the wheel holes and then snapped the assembly onto the rods on the lower rack. SIMPLE!! Should have done it a long time ago and could have save a lot of frustration with a sliding rack that didn't slide very well.
replaced new wheels
Very easy to use website. I put in model number, followed the parts to bottom rack, looked at picture, and selected the wheels and axles. Arrived quickly. It took only a couple of minutes to snap the wheels on the axles, and then snap them in place. Great experience! Made the dishwasher (bought in place with the new house) useable.
I removed the old ones (or atleast the ones that were still hanging on). I put the two pieces together (lower axle and wheel) and then just snapped them into place. Piece of cake even for a girl (which I am)
found this company online and called them because I couldn't find my part #. They found it right away and 4 days later I had new wheels on the lower rack.
Very easy quick repair. Should have ordered those new wheels a long time ago.
I ordered the parts on line and received them within 2 days. the parts were the right ones and repair was a snap.
Simply replace wheel
I snapped the old wheels off and snapped the new wheels on. Took me less then 5 minutes.
just snapped the new part in. couldn't have been easier
We took off the four remaing wheels and then attached the new axels to our new wheels. Then all we needed to do was snap the new axels to the rack. The new axels seem sturdier than the original ones that came with the dishwasher and now the rack slides in and out with ease. We still have to remind ourselves that we don't need to lift up the rack to move it anymore.
Ordered wheels and axles - axles is probably the key part, inserted new axle onto wheel, and wheel onto rack, snapped onto rack - job complete! - 2 minutes per wheel tops!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.