Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11726733
This kit includes the 8 wheels and 8 axles.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Help other customers find the most helpful instructions.
Were these instructions helpful?
Dishwasher rollers and other mechanical parts of plastic and rubber dry out and fail. A service call to an apppiiance repair person would have cost more than all the parts to repair the problem. Ordered them online on Sunday night, received them the following Wednesday, probably as fast as I could have had an appointment for a repairman. Changed out the parts in ten minutes and pocketed the change. $30 out of pocket instead of about $100, thanks to partselect.com.
Opened the package, opened the plastic parts bag, installed the roller and the cap.Whew!
Remove the old assembly (roller and stud) if they are still presentPush the new roller onto the new studthen push completed part onto lower rack until it snapsThese are much better quality than the originals
I placed a new snap device into the wheel athen attached it to the lower rack.
Took the old wheel off and replaced it with the new wheel. No tools necessary. Very simple to repair or make the change needed.
Just snap wheel axle into wheel then snap the whole wheel assembly on to rack.Much better design.
Snapped off the old wheels and clips and installed the new wheels. Make sure the wheels are installed on the holder prior to snapping the clip onto the dish rack. Very easy job.
very simple.... everything fit perfectly. So glad I was able to find others with same problem.
I snapped the wheel axle onto the wheel then snapped the wheel onto the dishwasher rack. It was very easy and straight forward.
once I found the parts I needed (real easy because of drawings), I ordered them, they came and I installed them. It was that simple!
I ordered a new wheel - from another company - and it was fine - but it didn't come with the axle. So I ordered both from you and it worked just fine. Thanks so much.
removed the rack and snapped the 4 week/axle assemblies on rack by hand pressure returned rack to track.
New wheels were inserted in place.
I ordered the replacement wheels and axels. I popped the axels into the wheel holes and then snapped the assembly onto the rods on the lower rack. SIMPLE!! Should have done it a long time ago and could have save a lot of frustration with a sliding rack that didn't slide very well.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.