Quick Question!

Have you ever purchased from PartSelect.com before?

11725221-1-S-GE-WD35X21041-Dishrack Rollers and Axles - Kit of 8
11725221-1-S-GE-WD35X21041-Dishrack Rollers and Axles - Kit of 8 11725221-2-S-GE-WD35X21041-Dishrack Rollers and Axles - Kit of 8 11725221-3-S-GE-WD35X21041-Dishrack Rollers and Axles - Kit of 8 http://www.partselect.com/Schematics/GE/00125688i04.gif

Dishrack Rollers and Axles - Kit of 8

PartSelect Number PS11725221

If you are having trouble rolling your dishrack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Look to replace the parts if the rollers or their axles are damaged. These rollers attach to the dishrack allowing the rack to roll in and out with ease. This pack includes 8 gray rollers measuring at approximately 1.75 inches L x 0.75 inches W x 1.75 inches H. Each roller comes with an axle.

This part works with the following brands: General Electric.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Noisy.
  • Door won’t close.
  • Not draining.
  • Door latch failure.
  • Leaking.

Compare At

$26.09

You Save

$4.35

Your Price

$21.74
Order within the next 11 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 181 reviews What's this?
76-90 of 181
 

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Marc from Sebastopol, CA

Axle attachment breaks on lower rack

Remove all wheels on one side. Use pliers to remove broken axles from wheels. Pop in new axles, then go to lower rack and attach to rack by pushing axle pinch mechanism onto rack support. New axles do not look like old ones—they are improved.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Mark from West Point, IA

Three lower tray wheels broken

Used plier to pinch the axle head to take the old wheels off then pushed the new wheels on by hand.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kathie from Baltimore, MD

The wheels kept falling off the lowe rack

I snapped the wheel axle onto the wheel then snapped the wheel onto the dishwasher rack. It was very easy and straight forward.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jeff from Vacaville, CA

Several wheel axels broken causing lower rack to fall

Removed all of the 8 wheels and axels, installed all new axels on new wheels and installed new parts. Very easy and anyone can do it. Now the lower rack rolls in and out like new. I should not have waited so long. The new wheels are wider than the old front wheels and should give more support when fully loaded.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Farrell from Grass Valley, CA

Needed to replace original wheels on bottom rack

Very easy job. Just took out the bottom rack and replaced the wheels that kept falling off. A no brainer! works wonderful now. Most impressed with the ease of ordering and amazed how quickly the parts were delivered to me. I saved alot of money doing it myself! Thnak you

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Barbara from Miles City, MT

One of the wheels fell off of my rack and I threw it away not realizing what it was.

I ordered a new wheel - from another company - and it was fine - but it didn't come with the axle. So I ordered both from you and it worked just fine. Thanks so much.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Simon from Great Falls, VA

The lower rack, front wheels kept falling off and getting melted on the element

We ordered 4 wheels and axels, took off the old wheels, assembled the new wheels by popping the axel into the wheel (really simple) and then snapping them onto the post. It was incredibly simple. We waited 3 days for the wheels to arrive,the mailing cost was more than the parts! The result is amazing, the lower rack now runs smoothly and sits inside the washer as it should do without falling down all the time. Well worth the small amount of effort to find the right part and much cheaper than buying a new one!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: richard from rio rancho, NM

Wheels were coming loose and melting on heater

I purchased the new white wheels and the redesigned clips. Installation was easy, no tools needed. I had a concern with the one size only wheels because the existing front 4 wheels were smaller than the rear. Not an issue once I installed the new wheels and clips. It rolls better, solid and sure than the existing wheels which would require extra effort if not pushed from the middle.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jonathan from New York, NY

Wheels keep falling off dish rack.

So easy and the posts on the site were incredibly helpful in determing what part i needed. The wheels on the dish rack inside the dishwasher kept falling off. I had to keep lifting the dish rack in and out of the dish washer to load and unload it. Unbelievably annoying. I popped the old wheel axels out of the exisiting wheels and replaced them with the new wheel axels I ordered from PartSelect. Then I attached the wheels back on the dish rack and it was right back to normal.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Melissa from Vienna, VA

New wheels for lower rack on dishwasher.

Ordered on a Friday and parts arrived Sat. No tools required. Pieces easily slipped into place. Dishwasher is all fixed. This site is much easier to use than GE's. Will use PartSelect for all future replacement parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gillian from Granite Bay, CA

Lower rack wheels kept falling off

I ordered the replacement wheels and axels. I popped the axels into the wheel holes and then snapped the assembly onto the rods on the lower rack. SIMPLE!! Should have done it a long time ago and could have save a lot of frustration with a sliding rack that didn't slide very well.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Rebecca from West Friendship, MD

The wheels fell off the bottom rack of the dishwasher

The replacement studs that were suggested fixed the problem that we were having. The fix was easy and took less than ten minutes to take the broken studs out and snap the new ones into place. The studs are designed to hold onto the rack much tighter than the original studs and completely fixed the problem of the wheels falling off anytime you tried to move the bottom rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ann from Brentwood, TN

Wheels kept falling off lower rack

Before I could get to the repair, my 12 son opened the parts and put the axles and wheels on. It was very simple and now it's like I have a new dishwasher!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Dishrack Rollers and Axles - Kit of 8
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Eric from Germantown, MD

The lower rack wheels kept coming off

I examined the wheels and noticed that they were actually fine, it was just the clip on axles that had worn out. I had recently used a dishwasher cleaner, I think that was the straw that broke the camels back. The replacement axles that I ordered were actually a bit different than the original. It turns out they had been greatly improved, so the new ones snapped easily into place by hand. The lower rack rolls perfectly, like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donna from Olney, MD

Wheels on lower rack broke off

Quck and easy to put on 8 new wheels. A must do for anyone with this dishwasher because the old wheels were poorly designed. I can't believe I waited so long to order them. They arrived within 2 days and took 5 minutes to put on. Be sure to order all 8 replacements wheels and 8 wheel axles.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

76-90 of 181