Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11725221
This includes eight rollers with axles.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
My husband was able to remove the wheels that were bending from the dishwasher rack. Then, he replaced the wheels with new ones and used new studs to hold the wheels in place.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Installed new roller which where larger than the original rollers. I believe these larger rollers will stop rack from slipping down near heating coils.The new rollers snapped on with very litlle effort.
It was sooo easy, I can't believe I took so long to get these new rollers and studs. Shipment arrived in 2 days, I removed those old melted wheels, through them away and installed the new ones, took me less than 10 minutes, it was painless, no tools needed. I did follow a tip from a buyer that was to attach the studs to the wheels prior attaching them to the lower rack and it was a very usefull tip. Do that! Now my dishwasher is like new again. Great shopping experience, Thank you!
This was a simple part swap. The stud rollers are the small peg-clips that hold the wheel on the lower dish rack. Removing the old stud rollers from the wheels required a pair of pliers. I then popped the new stud rollers into the old wheels and snapped them back onto the lower dish rack. I scored some major points from my frustrated wife -- easy, fast fix!
Man, if you need help doing this repair, you shouldn't even own a dishwasher, much less a house. This was the easiest repair in the entire galaxy. First, I removed the old wheels, which was easy becasue they were always falling off by themselves. I then had to use pliers to squeeze the old studs to remove them from the wheels. All the wheels were still in good shape. Then I snapped the wheels onto the new studs, and snapped the studs onto the lower rack. And then, it was like I was in heaven. Bluebirds were singing, the sun was shining, my lower rack was sliding in and out and in and out like it was new. O happy day.
Removed the existing stud rollers with the wheels attached. Then removed the wheels from the stud roller. Then snapped the wheels on the new "Better Designed" stud rollers. Then easily snapped the new stud roller assembly in place. Piece of cake...works like a charm.Thanks,Randy
We received our parts for our dishwasher within 2 days. It was very simple to find the parts on your site, and very easy to install. Our dishwasher is back to normal and the racks roll in and out easily. I would recommend ordering from PartSelect to anyone.
just exchange new wheels with new studs and popped back in. only thing I needed was to know that mfg had redesigned stud and replaced with quote a better mouse trap.
went to sears and was told axles not available ! after they sold my wife all 8 wheels in two diffrent colors. started looking on line found your web site I entered my model number. In a matter of minutes I found the parts checked stock ordered them and recived conformation. prices and shiping are fair. ordered recived and installed parts in 4 days WOW ! wished all purchases went this smooth. Von Neal
Dishwasher rollers and other mechanical parts of plastic and rubber dry out and fail. A service call to an apppiiance repair person would have cost more than all the parts to repair the problem. Ordered them online on Sunday night, received them the following Wednesday, probably as fast as I could have had an appointment for a repairman. Changed out the parts in ten minutes and pocketed the change. $30 out of pocket instead of about $100, thanks to partselect.com.
removed and replaced wheels, and had to bend metal on end stop bar to install new end stop.
Remove the old assembly (roller and stud) if they are still presentPush the new roller onto the new studthen push completed part onto lower rack until it snapsThese are much better quality than the originals
Poped old wheels off installed axels on new wheels and installed on basket.
I had called the manufacturer and their prices were outrageous and I still didn't have the part numbers. The partselect.com website was so easy to use that I instantly looked at the line drawings and was able to figure out what to order. It was a snap and I am not the most handy person. Their prices were good, and though I paid for the cheapest shipping, I got the parts the next day, which shocked me. They were an excellent company to deal with.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.