Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11725221
If you are having trouble rolling your dishrack in and out, there could be an issue with the rollers or axles. Check the existing rollers and axles for any visible physical damage. Look to replace the parts if the rollers or their axles are damaged. These rollers attach to the dishrack allowing the rack to roll in and out with ease. This pack includes 8 gray rollers measuring at approximately 1.75 inches L x 0.75 inches W x 1.75 inches H. Each roller comes with an axle.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Very easy job. Just took out the bottom rack and replaced the wheels that kept falling off. A no brainer! works wonderful now. Most impressed with the ease of ordering and amazed how quickly the parts were delivered to me. I saved alot of money doing it myself! Thnak you
Help other customers find the most helpful instructions.
Were these instructions helpful?
I ordered a new wheel - from another company - and it was fine - but it didn't come with the axle. So I ordered both from you and it worked just fine. Thanks so much.
We ordered 4 wheels and axels, took off the old wheels, assembled the new wheels by popping the axel into the wheel (really simple) and then snapping them onto the post. It was incredibly simple. We waited 3 days for the wheels to arrive,the mailing cost was more than the parts! The result is amazing, the lower rack now runs smoothly and sits inside the washer as it should do without falling down all the time. Well worth the small amount of effort to find the right part and much cheaper than buying a new one!
I purchased the new white wheels and the redesigned clips. Installation was easy, no tools needed. I had a concern with the one size only wheels because the existing front 4 wheels were smaller than the rear. Not an issue once I installed the new wheels and clips. It rolls better, solid and sure than the existing wheels which would require extra effort if not pushed from the middle.
So easy and the posts on the site were incredibly helpful in determing what part i needed. The wheels on the dish rack inside the dishwasher kept falling off. I had to keep lifting the dish rack in and out of the dish washer to load and unload it. Unbelievably annoying. I popped the old wheel axels out of the exisiting wheels and replaced them with the new wheel axels I ordered from PartSelect. Then I attached the wheels back on the dish rack and it was right back to normal.
Ordered on a Friday and parts arrived Sat. No tools required. Pieces easily slipped into place. Dishwasher is all fixed. This site is much easier to use than GE's. Will use PartSelect for all future replacement parts.
I ordered the replacement wheels and axels. I popped the axels into the wheel holes and then snapped the assembly onto the rods on the lower rack. SIMPLE!! Should have done it a long time ago and could have save a lot of frustration with a sliding rack that didn't slide very well.
The replacement studs that were suggested fixed the problem that we were having. The fix was easy and took less than ten minutes to take the broken studs out and snap the new ones into place. The studs are designed to hold onto the rack much tighter than the original studs and completely fixed the problem of the wheels falling off anytime you tried to move the bottom rack.
Before I could get to the repair, my 12 son opened the parts and put the axles and wheels on. It was very simple and now it's like I have a new dishwasher!!
I examined the wheels and noticed that they were actually fine, it was just the clip on axles that had worn out. I had recently used a dishwasher cleaner, I think that was the straw that broke the camels back. The replacement axles that I ordered were actually a bit different than the original. It turns out they had been greatly improved, so the new ones snapped easily into place by hand. The lower rack rolls perfectly, like new!
Quck and easy to put on 8 new wheels. A must do for anyone with this dishwasher because the old wheels were poorly designed. I can't believe I waited so long to order them. They arrived within 2 days and took 5 minutes to put on. Be sure to order all 8 replacements wheels and 8 wheel axles.
The repair was very simple. I removed all eight wheels and discarded the old axles by pinching them out of each wheel and replacing them with the new (and improved) axles. I then turned the rack upside down and simply snapped the wheels back on the spindles. It took me longer to explain this than it took to make the repairs.
snapped on wheels
The repair was so simple a child could do it. It took less than five minutes and now the drawer rolls smoothly and is quite sturdy.
I only had to repair the wheel axle. Since I read another post stating you don't have to change the wheels, I ordered only the axle and they popped right into the existing wheel and attached to bottom rack better than original design.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.