11723190-1-S-Whirlpool-W10827015-Pantry Drawer Lid
11723190-1-S-Whirlpool-W10827015-Pantry Drawer Lid 11723190-2-S-Whirlpool-W10827015-Pantry Drawer Lid http://www.partselect.com/Schematics/Maytag/55623.gif

Pantry Drawer Lid

PartSelect Number PS11723190

This part helps keep everything inside the drawer, it acts as a cover and also keeps you drawer at the proper temperature by creating a seal.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Fridge too cold.
  • Compare At

    $76.26
  • You Save

    $12.71
  • Your Price

    $63.55
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 52 reviews What's this?
 

15 of 23 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Thanh from Anaheim, CA

Ice maker making large block of ice, level broken, pantry cover broken

Pantry Cover:

I just slided out the tray, and unscrewed the left pantry panel that was broken, and replaced it with the new one, then put in the new cover after sliding the trays back in.

Ice Maker:

I unplugged the power connector in the back, unscrewed the ice maker with a flat screw driver (3 screws), slide it out, and then unplugged the wiring from the old ice maker and put it into the new one, mounted the new ice maker back in, make sure the lever is working, and then closed the freezer to let it cool down so that water can start flowing to it when it becomes cold enough (took about a good hour or so before water started filling the ice maker). Once the freezer was cold enough, water started filling the ice maker, and it begin making ice again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used:
  • Pantry Drawer Lid
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Angela from Bay Village, OH

Cracked plastic on pantry drawer lid

Broken lid popped out, new lid popped in. No tools required. 30 seconds to replace. Great price, part shipped within an hour of placing my order and arrived the next day, although I only paid for standard shipping. Excellent service - will definitely order again if the opportunity arises!

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 9 people found this instruction helpful

Parts Used:
  • Pantry Drawer Lid
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gene from Petaluma, CA

A friend dropped a jar of relish on the plastic window and cracked it.

Easy repair. Unwrapped the new cover; pulled the old one off by releasing tabs. Inserted new piece.
Took less than 15 minutes. Looks like new. The replacement part arrived quickly from Part Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used:
  • Pantry Drawer Lid
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Rolf from Stanhope, NJ

Broken drawer lid

Removed broken lid and snapped new one in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used:
  • Pantry Drawer Lid
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Alice from Santa Ana, CA

Lid kept popping off pantry drawer

Could not figure out why this was happening suddenly. Then remembered I had recently changed the lid to one I had stored for over two years in the garage. They had sent me a replacement lid when the unit was less than a year old because the origianl had a crack in the clear section. Noticed it seemed a little warped. Thought I would replace it to see if that solved the
problem.
We had to replace the side panel of the draawer because the warped lid had broken the peg off of one side. I didn't want that to happen again.
The new lid did the job....This company is the only one I will use in the future for my appliances. Very easy to find parts and the pricing was better.

Help other customers find the most helpful instructions.

Were these instructions helpful?