Quick Question!

Have you ever purchased from PartSelect.com before?

11723179-1-S-Whirlpool-W10822681-Water Inlet Valve
11723179-1-S-Whirlpool-W10822681-Water Inlet Valve 11723179-2-S-Whirlpool-W10822681-Water Inlet Valve 11723179-3-S-Whirlpool-W10822681-Water Inlet Valve http://www.partselect.com/Schematics/Maytag/CXMCICMZ.gif

Water Inlet Valve

PartSelect Number PS11723179

NOTE: Tubing coupler is sold separately. Some refrigerators use a separate customer connection fitting.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Ice maker not making ice.
  • Not dispensing water.

Compare At

$95.24

You Save

$15.87

Your Price

$79.37
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

47 of 110 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Socket set
Customer: Jerome from Decatur, IL

Valve leaking due to being frozen in storage

removed old valve after finding out it leaked really bad. Got on line ordered new valve and it arrived in one day. great service from you guys. there was a little difference in the valves, push in line fitting on the new valve, screw in fittings on the old one. took less than 20 minutes to install and works great, thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Wrench set
Customer: Brian from DAYTONA BEACH, FL

Ice maker was dripping excess water and making large icicles inside the freezer.

Found several videos online showing this process. It was difficult to separate the main water line input module from the original water valve, but persistence paid off and I was able to separate them using a large flat head screwdriver by twisting in grove on the back side. Putting in the new valve system was really easy once you cut the old screw nut sections off the lines. The output lines are different sizes so you can't mess that part up. Just be careful when dealing with the 3rd line that is the same as one of the output lines in size. I just marked mine with a permanent marker so I didn't get them confused or swapped around. Another problem was the two pieces did not fit together like I expected because of design differences. I was able to mount them one above the other by using one of the screw holes for the cardboard back cover to mount the main water input module. Everything works fine now. No leaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2