Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/54387.gif
See part 2 in the diagram
http://www.partselect.com/Schematics/Maytag/54387.gif

DISCONTINUED

PartSelect Number PS11723160

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • Leaking.
  • No hot or cold water.

Compare At

$71.81

You Save

$11.97

Your Price

$59.84
Order within the next 12 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

17 of 20 people found this instruction helpful

Parts Used:
  • DISCONTINUED
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Randy from Brewster, NY

Cold water would not shut off

Unplug the A/C plug from outlet.
Turn off the hot and cold water valves.
Disconnect the hot and cold water inlet hoses from the back of machine.
Raise top cover of washing machine by inserting flat screwdriver about 3 inches in from right and left front corners and push against clips. (look in gap between top cover and cabinet to locate exact location of clips.
With 1/4 inch nut driver remove 1 screw holding water valve to cabinet.
With 1/4 inch nut driver remove 1 screw holding water valve to bracket.
Place new water valve in bracket and tighten screw.
Noting orintation transfer wire harness from old valve to new.
Reattach valve bracket to cabinet with one screw.Lower lid.Reattach hot and cold water hoses to valves(note hot and cold). Turn on water, plug in a/c cord. Test to make sure water valve shuts off, and check for leaks where you connected hot and cold hoses.
Congradulations, you saved $160 labor and a discount on the part.


Now remove

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: KRIS from MARIETTA, GA

Water leaking,after spin cycle.

unplug cord,disconnect hoses,pop front clips,swing up the top,unplug wires,unscrew bracket with valve,replace valve and reinstall.I did replace hinge because I pulled up to hard the top.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
  • DISCONTINUED
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Jesse from Lawrenceville, GA

No cold water and slow leak.

After opening up the washer I found major corrosion on the cold valve. The diagram from the website was very easy to locate and order the part. Shipping was very quick and am happy to say that was the issue and everything is working like normal. Very pleased and recommend to everyone.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3