Quick Question!

Have you ever purchased from PartSelect.com before?

11723153-1-S-Whirlpool-W10820036-Lid Switch
11723153-1-S-Whirlpool-W10820036-Lid Switch 11723153-2-S-Whirlpool-W10820036-Lid Switch 11723153-3-S-Whirlpool-W10820036-Lid Switch http://www.partselect.com/Schematics/Maytag/37306.gif

Lid Switch

PartSelect Number PS11723153

This two and a half inch long lid switch is used for washing machines that do not have a tub light.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Will not drain.
  • Will not shut off.
  • Will not agitate.
  • Pumps but will not spin.
  • Timer will not advance.

Compare At

$24.50

You Save

$4.08

Your Price

$20.42
Order within the next 8 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 17 reviews What's this?
16-17 of 17
 

4 of 12 people found this instruction helpful

Parts Used:
  • Lid Switch
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Edward from Nanuet, NY

Washer would fill with water but not start

took part top of washer saw switch replaced it not to difficult it is always easier when you have new one to look at

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 7 people found this instruction helpful

Parts Used:
  • Lid Switch
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers, Socket set
Customer: Andris from Sands Point, NY

Dryer would not activate

>removed 2 screws connecting the vent filter to the top lid of the unit (just in front of removable filter).
>Losing two screws at the back of the machine, just below control panel to allow free movement of the top lid on its hinges.
>Raise top lid & supported open.
>Now have free access to door switch (inside , front right fastened to front panel)
>removed the old switch
>fasten new switch (required new wire connector which was supplied with package) to existing wiring and replaced.
>Works perfectly!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-17 of 17