Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11723153
This 3 prong lid switch is used for washing machines that do not have a tub light.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Unfortunately after i replaced the new switch the drier worked well. After it stopped for the 2nd time we wanted to put a load and start the swit lost contact. It was not working.It lost the contact with the circuit. No clicking sound the drier not functional. I guess need a new switch?
Help other customers find the most helpful instructions.
Were these instructions helpful?
took part top of washer saw switch replaced it not to difficult it is always easier when you have new one to look at
>removed 2 screws connecting the vent filter to the top lid of the unit (just in front of removable filter).>Losing two screws at the back of the machine, just below control panel to allow free movement of the top lid on its hinges.>Raise top lid & supported open.>Now have free access to door switch (inside , front right fastened to front panel)>removed the old switch>fasten new switch (required new wire connector which was supplied with package) to existing wiring and replaced.>Works perfectly!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.