Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bonnie R - August 7, 2022
Verified Purchase
front panel switch
wasn't hard for my husband to switch our black panel to the new stainless one. TIP....it's too difficult to read the model # on the compactor....take a photo of the part sticker and read it easily on your phone.
What a great update to match new appliances for only a small fraction of the cost of a new compactor.
★★★★★
★★★★★
MARGARET R - June 3, 2019
Verified Purchase
Compactor front
came quickly and was easy to install. looks great.
★★★★★
★★★★★
Hight F - May 21, 2019
Verified Purchase
Perfect fit
Perfect part, perfect fit and perfect service!
★★★★★
★★★★★
Greg H - April 22, 2019
Verified Purchase
Easy to swap out
Converted our kitchen to stainless steel from black. Didn't want to spend extra for a new compactor so we just swapped out the front panel. Easy to do with just a screwdriver.
★★★★★
★★★★★
Alan S - January 25, 2019
Verified Purchase
Effect part
Part was exactly the correct one on a 15 year old trash Compactor
★★★★★
★★★★★
Michael C - December 21, 2018
Verified Purchase
Looks like new!
Bought a stainless panel for my old Kenmore trash compactor. Now it matches my other stainless appliances. The old compactor looks new again! Great part and easy to install!
★★★★★
★★★★★
Maryann A - June 29, 2018
Verified Purchase
Perfect fit,looks like a brand new compactor
The help I received with all of my questions concerning if this front panel would fit was wonderful. They assured me it could be returned if it did not fit. I wanted to surprise my husband so I did this myself...very easy! Unfastened the screws of the blank front panel and fastened in the new stainless. Honestly it took very little time and looks like a brand new compactor. I saved a lot of money doing this as our trash compactor worked fine but I wanted to update it with the other appliances. Imagine how surprised I was also to get this in the mail one day later! I am very pleased with PartSelect.
★★★★★
★★★★★
Timothy C - March 19, 2018
Verified Purchase
Easy repair,part looks great
Took an all white trash compactor and made it into stainless steel. It looks brand new.
★★★★★
★★★★★
Joseph D - February 11, 2018
Verified Purchase
easy replacement for my black panel front. 8 screws, one screwdriver needed to replace.
came in excellent condition fit perfectly.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
I purchased all new aplliances in stainless steel, rather than buying a new compact in decided to just change the front panel to stainles.I ordered the panel from Part Select,They sent me the exact part it was geeat. Now all my appliance match!
I just exchanged the panel and fooled everyone. Thanks Part select.
James from Layton, UT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
20 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upgrade to Stainless Steel Front
My wife has been wanting to upgrade the kitchen appliances to stainless. We were looking to purchase a new trash compactor for about $500 but I had an idea to just swap out the front panel since our exisiting compactor was in excellent condition. For less than $100 and less than one hours work with a phillips screwdriver, I accomplished
... Read more the upgrade. Now my wife is happy and we're pleased with the perfect fit.
Read less
Larry from Fayetteville, GA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
14 of 21 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jenny
February 4, 2019
Will this stainless steel front panel fit in my Whirlpool tu8000xrp1 trash compactor? Looks like it will
For model number TU8000XRP1
Hello Jenny, Thank you for contacting us. I have researched the model you have provided and have found the part number PS11723074 is not listed as a compatible Panel for your appliance and there is no Stainless Steel option listed. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
David
June 10, 2019
Would this brushed nickel panel work on my compactor? It has a black panel right now that cross referenced to the other model
For model number GC900QPPB6
Hello David, thank you for writing. This part is not shown as compatible to your model. For your model it is only available in black (part PS11747569) and white (part PS11747568).
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jamie
October 17, 2019
What are the measurements? Looking to retrofit for another compactor.
For model number N/a
Hello Jamie, Thank you for the question. This panel is about 24.5" x 15.3". Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
David Brown
January 23, 2020
Want to replace the present almond front panel with stainless steel. Is the upper small control panel and bottom small plate with foot pedal available in stainless or is it included?
For model number GX900QPLT0
Hello David, thank you for your question. Unfortunately, the control panel and foot pedal plate does not come in stainless. Those parts have been discontinued.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
October 16, 2019
Do you have a replacement stainless steel panel for this Whirlpool compactor?
For model number SFC850001
Hello Linda, thank you for your question. Unfortunately, this compactor does not have a replacement stainless panel that is available and the part you have referenced is not compatible. I apologize. For more information please contact the manufacturer directly. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marvin
February 13, 2019
Does this stainless steel front panel fit my 20 year old trash compactor? The current white is bent and rusted. Unit runs great!
For model number TC407W6 Serial # 517688YF
Hi Marvin, thank you for your question. Unfortunately this part is an inch too long and wide to fit the size for your old panel. Your original panel has been discontinued and does not have a substitute listed for it. I would suggest contacting your manufacturer for further information. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cara Gillette
January 30, 2020
I have a Whirlpool compactor that’s more than 20 years old. If i order the panel (stainless steel) and it’s slightly too big, could my contractor cut it down a bit?
For model number Not sure
Hi Cara. Sadly we do not have expertise on modifying larger panels. This would be outside of the scope of our support. Thank you for your question and good luck with your repair.
Was this helpful?
Thank you for voting!
Bob
February 14, 2020
Will this panel fit the Kenmore model above?
For model number 66513614101
Good Day Bob. Thank you for your question in regards to your unit (Model Number 66513614101). Based on our research the PartSelect Number for the part that is compatible with your unit is PS11723074. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
John
February 10, 2022
Will this part fit on our model?
For model number TC507B0
Hello John, thank you for writing. Yes, the part PartSelect Number PS11723074 you had chosen is compatible with your model. We hope to hear from you soon.
Was this helpful?
Thank you for voting!
Judy
June 14, 2022
I have a Kenmore trash compactor. The plastic over the control panel (covers the switches) has cracked & fell off. Please tell me how to repair this. Thank you
Hello Judy, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
