This OEM gray Dishwasher Lower Dishrack Wheel Assembly is a plastic kit that allows the rack to slide in and out of the dishwasher easily. If it breaks or becomes damaged. sliding will feel difficult. This can happen due to normal wear and tear, and the part should be replaced if this occurs. Check your model number and user manual to make sure this part is correct. It attaches directly to the dishrack. To repair, open the dishwasher door and pull out the lower dishrack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. It measures roughly 3x6 inches.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your KitchenAid Dishwasher Lower Dishrack Wheel
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Door won’t close | Noisy | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Whirlpool, Maytag, Kenmore.
Part# W10195416 replaces these:
W10195416V, W10195416VP
Customer Reviews
Average Rating:
★★★★★
★★★★★
328 Reviews
4.8
Filter By Rating:
5 Stars
290
4 Stars
25
3 Stars
6
2 Stars
2
1 Star
5
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Lowell M - 23 days ago
Verified Purchase
Ordering was easy. Part was received in a couple of days. Correct part was shipped and install went perfect. Thanks!
Correct part, easy install!
★★★★★
★★★★★
Deborah W - March 6, 2024
Verified Purchase
Easy Repair
The part was very easy to replace. Great instructions.
★★★★★
★★★★★
Leslie J - March 2, 2024
Verified Purchase
Video Directions superb!
Follow instructions and done in 30 seconds.
★★★★★
★★★★★
Douglas F - March 1, 2024
Verified Purchase
The right part
Part arrived quickly and was very easy to install
★★★★★
★★★★★
Don M - February 12, 2024
Verified Purchase
Easy repai - worked as expected
Brand new replacement - fit perfectly. On-line video showed how to install it.
★★★★★
★★★★★
Barbara & John K - February 3, 2024
Verified Purchase
Easy repair
New parts, easy to take off old part & replace with new wheel housing. Works like rack is brand new again.
★★★★★
★★★★★
Raymond M - November 22, 2023
Verified Purchase
Easy repair
Perfect and fast delivery
★★★★★
★★★★★
Debra K - August 16, 2023
Verified Purchase
As order
Works and fits!
★★★★★
★★★★★
Anthony G - August 9, 2023
Verified Purchase
Easy to install. Works as good as original.
Took me 1 minute to repair my dishwasher
★★★★★
★★★★★
Michael B - August 5, 2023
Verified Purchase
Easy repair & great service!
Just like the original part. I replaced all 4 wheel sets in about five minutes. Now its just like new....very easy. Fast shipping and great service by PartSelect. I ordered 1 set thinking that would do all 4 sides but I had to order 3 more to finish the job. PartSelect sent the other 3 sets quickly and didn't charge for shipping even though the mistake was mine. Thanks!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 4.8 / 5.0, 28 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bottom Rack Wheel Assembly
Installation was very easy. The online video was excellent and clear. Thanks
Albert from LIBERTY TWP, OH
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The wheels on the bottom ‘basket’ are only fastened by a ‘Snap-in’ (plug) style connector that gets brittle and breaks over time
Pop off the shell assembly from the bottom basket and clip/click on a new wheel assembly.
Plastic pieces had broken on both the top and bottom racks
The parts select site had an excellent breakdown of what I needed to replace. When I got the pieces, however, it wasn't so apparent how to do it. I actually used YouTube video to show the process.
The trickiest part was actually uninstalling the broken pieces. I had to work backwards through the YouTube video.
The o
... Read morether tricky bit is having a sense of how hard you can push to snap plastic pieces in and out.
Also, watch the whole video! I didn't, and I ran out for a tool (a star driver, I think that's what it's called) that was actually in the bag of screws that came with the assembly.
It seems like Kitchen Aid realizes they have a problem with plastic fatigue, because they have replaced some of the plastic parts with metal.
If you take your time and stay organized this is a very doable repair.
Very, Very easy - watched the Installation Video highlighted on web page and the entire process took less than 5 minutes!
Linda from TRES PINOS, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wheels fell off
These wheel assembly that came on the lower rack of my dishwasher were junk! They started falling off within 6 months. I put them back on to the point that the pin in the center of the wheels would no long stay in place, thus the frustrating situation of the wheels falling off often.
Assembly was easy peasy!
Jan B. from BEAVER, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wheel broke off the lower rack on my dishwasher.
Just snapped in the wheel assembly very easy.
Marvin from WANTAGH, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower rack's wheels broke, all 4 pairs
With a little pressure, I was able to push off the broken wheel pieces with my thumbs. I was able to snap on the new wheel pieces really easily. This job took less than 15 minutes to replace all 4 wheel pieces.
Carrie from SAN TAN VLY, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced wheels on lower rack
My husband did the repair. It was very easy. He basically just popped off the old wheels and popped on the new ones.
Jane from JOLIET, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
December 11, 2023
How many wheel assemblies come in the order?
For model number WDT910SAYH0
Hello Susan, thank you for reaching out. The dish-rack roller is sold individually. We hope this information helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Lawrence
November 21, 2023
For a broken wheel on bottom rack can I replace the wheel only or do you have to replace whole wheel assembly ?
For model number MDB8959SFZ4
Hi Lawrence, Thank you for writing. The Wheel is not sold on its own sorry, the whole Wheel Assembly will need to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lauren
February 25, 2024
Hi, do these wheels work with the above model?
For model number JDB9000CWS2
Hello Lauren, thank you for your your question. No. The correct Lower Dishrack Wheel is PS11750057. Good luck and have a great day.
