Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11722137
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
Removed by hand the old water filter and installed the new one.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I took the bottom tray out removed 2 screws that were under it. Pop the decorative trim piece off and remove three screws under it. Pull the dispenser out and pop the new door into tabs. I didn't replace the solenoid. Save that for later if I need to.
This is a very simple repair.Unplug the appliance first because you're dealing with an electrical connection to the ice maker.Remove ice holder by lifting up on the tray.This exposes the ice maker.Remove hex head screw that holds ice maker to side of unit(the empty end of an all in screw driver is the exact size.Then lift up on the ice maker and pull away from the wall of unit.Unplug both ends of supply harness by squeezing the side of the plug ends.Remove the metal bale from old unit and reinstall the wiring harness and bale on the new unit.If you've gotten this far the new installation is a breeze.Plug in new unit and reattach to wall.Ice will start making in about an hour or two.
First I removed the top shelf and its contents to allow for more room. Then I removed the plastic temperature control housing by tugging housing forward and releasing it from the two clips located at the upper rear corners of the fridge. Then pull down. Then I removed the three screws holding the entire temperature control assembly and dropped it down to access and remove defrost assy. Installed new defrost assy. and re-assemble in reverse. Change light bulbs before replacing final housing. Also, a good time to clean housing interior before re-installing.
My husband did the replacement of the filter, so it was really easy for me. Easy for him too! The best part was this company had the best price, and the part was here in no time!
Open refridgerator door, remove old filter by hand in a counterclockwise direction. Insert new filter turning clockwise. Close refridgerator door and fill a glass with water from dispenser. This will remove air and ensure water to free flow. Check for leaks.
have always done it myself, but Maytag store closed, so I didn't know where to purchase filterI received it from Parts Select, in 2 days and if I remember right, price was cheaper than I paid last year, at store.
Just a filter replacement -- however more impressed with the speed of which I could receive the replacement.Can't find them anywhere local -- glad I found Part Perfect!
Followed the video instructions provided by the seller . THANKS , VERY HELPFUL !!!!
Removed old filter with a twist and installed new filter the same way. Very simple task.
Needed to replace water filter. Part arrived very quickly and was cheaper than nearby stores. I replaced old one within minutes. I also purchased air conditioner knob that other local places said were very difficult for them to locate. I am very pleased with the service, selection and the ease at selecting the correct parts.
took off the faceplate on the door and replaced the limit switch. It was really easy to get to. Simple JobParts Select was really easy to deal with the parts came really really fast. Had my machine fixed in no time. Thanks Parts select.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.