Quick Question!

Have you ever purchased from PartSelect.com before?

11722132-1-S-Whirlpool-EDR5RXD1-Water Filter
11722132-1-S-Whirlpool-EDR5RXD1-Water Filter 11722132-2-S-Whirlpool-EDR5RXD1-Water Filter http://www.partselect.com/Schematics/Maytag/I48I6BHN.gif

Water Filter

PartSelect Number PS11722132

This ice and water filter fits all Whirlpool and KitchenAid refrigerators with a water filter located in the base grill, below the refrigerator door. This part will also fit any Kenmore models starting with 106. This filter is NSF certified, and is meant to filter for taste and odor, sediment, chlorine, and lead. The filtering provides overall better tasting and higher quality water. For best results, it is recommended to change your ice and water filter every six months or 200 gallons of filtered water. For better filtering, try the PS373105 filter. There are no tools required for this repair.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, KENMORE®, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker not making ice.
  • Leaking.
  • Not dispensing water.
  • Touchpad does not respond.
  • Ice maker won’t dispense ice.
  • Ice maker dispenses too little ice.

Compare At

$84.62

You Save

$14.10

Your Price

$70.52
Order within the next 9 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 71 reviews What's this?
61-71 of 71
 

29 of 648 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Harry from Audubon, PA

Ice maker stopped making ice

After researching the problem on parts select I found that there were several reasons why the ice maker would stop working. The number one reason was the electronic sensors fail,these tell the ice maker when ice bucket is filled. The light on the electronic eye will blink a code to diagnose the if there is a problem with the sensor. In my case the sensor was bad(the red sensor light would not stay on). The light transmitter is on the right and the reciever is on the left. First make sure there is nothing blocking the holes by cleaning them with a "q" tip. If they still don't work and the blinking code indicates failure them they need to be replaced.The sensors are behind panels on the left and right; each panel had 3 screws that need to be removed. First shut off power to the frig. Once you remove the screws you will find a quick connect attached to a electronic board on each side. Unplug each board and replace with the new part. Replace the panels and turn on the frig to test. The instructions in the parts box will tell you the light codes that will indicate that the boards are working. One note, I did this repair , the sensors were working and I did not get ice after 30-60 minutes.I found out that the water fill tube(black tube at the top of icemaker) was clogged with frozen water thus the ice tray never filled. After clearing out the ice with a small pipe cleaner the ice maker tray fill with water and the ice maker made ice on schedule.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

27 of 648 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Joe from El Dorado Hills, CA

Door shelves were cracked or broken

Took food off the shelves.
Removed broken shelves.
Installed new Shelves.
Could not replace filter because I was not smart enough to buy the correct filter. I returned the filter and cracked open a beer.
Job Completed!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

26 of 648 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Louis from Palm Beach Gardens, FL

Replace deteriorated overflow grille

Simple replacement in 1 minute. Received exact factory part that allowed simple exchange.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

22 of 640 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Betty from Petaluma, AL

Needed new water filter...red indication light on.

Turned the icemaker off (lifted the wire up inside the freezer). Used a pliers to turn and take the circular cover off..located on the bottom of the refrigerator grill..it was tight. Pulled out old filter, put new one on..thats it! Simple. We had to reset the red light inside the refrigerator..pushed it, heard a beep, pushed again, got the green light.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

22 of 641 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Barry from Danville, VA

Needed new water filter

very simple turned filter 1/4 counterclock wise removed insert new filter turned 1/4 turn clock wise finished

Help other customers find the most helpful instructions.

Were these instructions helpful?   

23 of 645 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Susan from Albany, GA

Just time to replace!

Took them off and fit the new parts in their place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

21 of 639 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dennis from Chocowinity, NC

Replace filter that had expired

Twisted filted out from bottom of frig; removed cap and placed on new filter and pushed filter into bottom of frig and twisted clockwise to lock into place. Remove a few qts of water to clear new filter and reset light and was finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

21 of 639 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Rowan from Miramar, FL

Ice guide broken, filter needs changing

This was a very easy repair. The ice guide has 3 pegs that just clicked into the opening to position it. The ice and water filter was easy as well. I turned the water off because I was not sure if the water would leak when I removed it.

One thing is to make sure you run the water for a while after installation to recharge the water line and to get all air out of the line, and to run the filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

20 of 638 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Mary from Charlotte, NC

Door shelf was cracked, so that it sagged on one side.

I washed the new shelf, took the food out of the old one, slid the new one into place and replaced the food. It took less time than opening the packaging! As for the filter, that's routine maintenance, which my son kindly did for me, as squatting to get to the floor-level filter is not as easy as it used to be.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

20 of 638 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Jane from Porter, TX

Replace water/ice filter

simple procedure of turning knob at bottom of fridge 1/2 turn to left, removing old filter, inserting new filter and turning knob to right. Used pliers to turn knob. Part replaced by female of the house.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

21 of 642 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michael from New Berlin, WI

Old water/ice filter and broken door bin

My repair tool less than a minute, but I just wanted to say how fast my parts got here. I only requested standard mail but the parts were here the next day. Thanks for your prompt service!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

61-71 of 71