Quick Question!

Have you ever purchased from PartSelect.com before?

11722132-1-S-Whirlpool-EDR5RXD1-Water Filter
11722132-1-S-Whirlpool-EDR5RXD1-Water Filter 11722132-2-S-Whirlpool-EDR5RXD1-Water Filter http://www.partselect.com/Schematics/Maytag/I48I6BHN.gif

Water Filter

PartSelect Number PS11722132

Fits all Whirlpool and KitchenAid refrigerators with a water filter located in the base grill below the door. For better filtering, try the PS373105. Also for Kenmore models starting with 106. Filters for taste and odor, sediment, chlorine, lead.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker not making ice.
  • Leaking.
  • Not dispensing water.
  • Touchpad does not respond.
  • Ice maker won’t dispense ice.
  • Ice maker dispenses too little ice.
  • Compare At

    $81.64
  • You Save

    $13.61
  • Your Price

    $68.03
In Stock
Order within the next 1 hr and 34 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 69 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: A. from Huntersville, NC

A drawer support wheel had broken off the lower support shelf frame making drawer opening very difficult

I removed the glass shelf and drawer, tugged on the frame to snap it out of position, snapped the new frame in place, replaced the shelf and drawer and done... So easy, a 5 year old could do it...

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Jerry from Hephzibah, GA

Will not make ice

turned off the machine. removed the ice maker door. removed the wiring harness cover. press on locking clips, removed ice maker. disconnect wiring harness. removed three screws from cover and installed on new ice maker. installed in reverse order of removable.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench set
Customer: William from Cincinnati, OH

Ice maker stopped working

Ordered and installed new icemaker. Still didn't work. Called repairman who replaced cut-off sensor (expensive service call) Worked briefly, then stopped. Service man said new icemaker was defective. Called PartsSelect and they promptly sent another one (great service). Made ice for 12 hours and then stopped. Did nothing for 36 hours and it suddenly started working again and works fine now. Beats me.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Tina from Hawthorne, CA

Dryer's timer knob had broken off

REmoved the broken one, put the new one on, just needed my reading glasses to figure out if I had the straight side matched up so it would work. Couldn't have been easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jay from Seminole, FL

The filter was due for replacement.

Simply turned the original filter counter clockwise, pulled it out and discarded it. Then I inserted the new filter and turned it clockwise. Repair done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: JOEL from LAKE WORTH, FL

Filter needed replacing

I/4 turn and pull out old filter. Insert new filter and turn 1/4. Shipping time from partselect was unbelievable, one (1) day. Highly recommend this company !!! This site is a great help to the do-it-your-selfer. Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ira from Wauconda, IL

Needed to replace water/ice filter

The hardest part was getting the model number. (My vision is not that good.) After I got the number, the rest was cake! In less than a week, I had it ordered,shipped, delivered and installed!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: William from Attleboro, MA

Red indicator light on frig was on indicating that filter needed to be changed.

As shown in your video, very easy, no tools required.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: JOSEPHINE F from Bakersfield, CA

Replace ice and water filter

remove-slight turn of filter
replace-turn and it was replace

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: kenneth from gardiner, ME

Stripper arm broke

I had to disassemble the unit. After it was out I unpluged the wires and removed the broken ends of the stripper. Most of my time was spent figuring out how everything worked. I installed the new arm and slipped the unit back in place. It works perfectly. I could do it in under 30 minutes now. The cost savings is well worth the effort.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers, Socket set
Customer: Ron from Bremerton, WA

Ice maker wouldn't work.

First I removed the ice tray door by lifting and then releasing the hinge. Then I used a nutdriver and socket to remove three recessed screws that are located under the icemaker. I also removed the screw on the underside which holds a plastic flange in place covering the wiring harness. Remove the plastic flange and slide the icemaker out as far as possible, then disconnect the wiring harness from the icemaker. Slide the old unit out and discard. Reverse the procedure to install the new unit. Points of frustration: Disconnecting the wiring harness--it is in there mighty tight! Also, when sliding the new unit into place, clearing the rubber water spout without breaking something is somewahat of a challenge. The unit comes out
easier than it goes back in!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Alvin from Gonzales, LA

Filter needed changing

All of 16 seconds. It took longer to get it out of the box than to change it. Untwist the old one, pull it out and replace the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used:
  • Water Filter
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: harold from sorrento, FL

Filter was old

Unscrewed oldfilter and installed new. Very easy repair

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Earle from Bluffton, SC

Needed new filter and broken vent grille

for the filter, removed the front fascia of the fridge and pulled out the filter. replacing the filter was very easy-slides right in. for the vent grille, it need to have the metal snaps replaced with a screwdriver and then it snapped right in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: michael from duluth, MN

My wife put a loaf of bread in ice cube holder, and broke the ice maker

Found the correct part on line,watched a how to vidieo from your web site and replaced it.

Help other customers find the most helpful instructions.

Were these instructions helpful?