Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11722132
This ice and water filter fits all Whirlpool and KitchenAid refrigerators with a water filter located in the base grill, below the refrigerator door. This part will also fit any Kenmore models starting with 106. This filter is NSF certified, and is meant to filter for taste and odor, sediment, chlorine, and lead. The filtering provides overall better tasting and higher quality water. For best results, it is recommended to change your ice and water filter every six months or 200 gallons of filtered water. For better filtering, try the PS373105 filter. There are no tools required for this repair.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
for the filter, removed the front fascia of the fridge and pulled out the filter. replacing the filter was very easy-slides right in. for the vent grille, it need to have the metal snaps replaced with a screwdriver and then it snapped right in.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Found the correct part on line,watched a how to vidieo from your web site and replaced it.
Removed the door with Socket set & removed the lower door closing cam, replaced it with the new one and reattached the door. Biggest part of the problem was diagnosing the part needed. I replaced the filter while I was at it.
Replaced crisper pan - perfect fit.
Water filter screws out and in, no problem there. The ice maker auger was a little detailed, but I removed all screws and took apart the main components. The auger assembly was reverse threaded, and the blades, etc., all came off in order. Then the old auger drum was removed, new one put on, and the auger assembly reassembled. Then screwed all components back together, put it back in the freezer, and it worked like a charm!
It's very simple and fast to make.
Remove filter, and replace with new one.
After checking the codes, they indicated that the emmitter board was inoperative so I changed the control boards. Very simple and straight forward (about 10 minutes). After changing the boards I double checked the codes, this time the codes indicated the control boards were functioning properly but still no ice. A friend suggested the water feed line could be frozen and defrosting the freezer could possibly resolve the problem. My freezer is full and it will take time to empty it to continue. Any other suggestions in the meantime? Installing the new water filter took about a minute and is working properly.
The glass shelf was broken when I was cleaning the refrigerator. The crisper had broken with daily wear and tear.I was tired of seeing a crisper with duct tape and a shelf replaced by cardboard. I looked online and found the most reasonble prices at this site. My order came extremely quickly! It was so simple to replace the needed areas, including a new water filter. I would recommend this site to anyone!!
Just Snapped out the old bins and snaped the new ones in . Have not replaced filter yet but it also is a snap.
According to directions on cylinder. I will probably need another filter around june 2012.
Pull the old filter out and replaced it with the new fliltler
put filter in &turn to right to lock in place. I can't get the fliter to go in & lock for some reason. I have changed the filter before realy easy not this time.
Removed lower rackand several old stud rollers . reapplied them and then attached the new wheels The parts arrived within 24 hours of me ordering. Excellent service. Thanks so much
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.