Ice Bucket and Auger Assembly

PartSelect Number PS11701246

This assembly includes the auger, bucket, cutting assembly (blades) and cover.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.
  • Ice maker not making ice.
  • Ice maker dispenses too much ice.
  • Ice maker dispenses too little ice.
  • Compare At

    $129.74
  • You Save

    $21.62
  • Your Price

    $108.12
In Stock
Order within the next 3 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 29 reviews What's this?
1-5 of 29
 

53 of 69 people found this instruction helpful

Parts Used

  • Ice Bucket and Auger Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerGunars from Arlington, TX

Plastic piece on front of ice bucket auger cracked an broke off

I just pulled the old Ice bucket assembly out and replaced it with the new one. Couldn't get any easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

46 of 75 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJOHN from KINGSFORD, MI

Ice crusher/dispenser would run but no ice would come out.

I removed the ice drawer,dumped out the ice and found the front end of the clear plastic auger and the crusher housing cover were broken. To dissassemble the auger system, I removed the phillips head screws that hold the crusher-dispenser onto the drawer, took off the washer and extrernal snap-ring from the auger shaft end. After removing the auger assebly, I pressed in on two plastic catches (on the dispenser housing) and gently pried the dispenser from the drawer with a small flat screwdriver. Then I removed the plastic nut from the end of the auger. Ass'y was much easier once the parts arrived. This repair would probably be too much for the average homeowner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

27 of 46 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerPhil from Loomis, CA

Brittle plastic pieces crack and break.

Repair was simple; unscrew and unsnap the various pieces, and snap-and-screw it back to together. But what a disappointing design. Between replacing seized solenoids (twice) and plastic parts, this through-the-door dispenser "feature" is a maintenance money pit. Sure glad that PartSelect can provide the parts quickly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 24 people found this instruction helpful

Parts Used

  • Ice Bucket and Auger Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerGary from Spring Hill, FL

Part of auger broke

We ordered the basket with auger and all I had to do was take the old one out and slide the new one in. EASY !

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 12 people found this instruction helpful

Parts Used

  • Ice Bucket and Auger Assembly

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerJaci from Grand Island, NE

Ice maker was not working

Shipping service was great> Ordered on a Friday, received it on Tuesday. Slipped out the old one and put the new one in and it works great

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 29