1156014-2-S-Whirlpool-8206443           -Light Bulb - 40W
1156014-2-S-Whirlpool-8206443           -Light Bulb - 40W 1156014-1-S-Whirlpool-8206443           -Light Bulb - 40W

Light Bulb - 40W

PartSelect Number PS1156014

Sold Individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $4.15
  • You Save

    $.69
  • Your Price

    $3.46
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Light Bulb Socket and Housing

Part Number 389948

$18.07
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 6 reviews What's this?
1-6 of 6
 

111 of 192 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerChris from Cedar Hill TX

Burned out light under microwave and filters needed changing

I just removed the multiple screws which held the hood cover on. I then attempted to remove the light bulbs from the socket. This proved impossible because the bulbs were so fragile from the heat and grease build up. To make this task much easier and probably safer, just replace the bulb housing and light bulb. The bulb housing unplugs very easily. Just replace it then screw your new bulb in. P.S. Be sure to unplug appliance before you start.

The filters are very easy to replace. No tools needed.

Hope this helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

69 of 136 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDAVID from SAINT PAUL MN

Burned out bulbs and grimey filters

FIrst I removed the glass bulb cover, old bulbs, and old filters. Then I removed the 6 screws that held the lower cover in place, and bulb sockets. Then washed all parts an reassembled with new bulbs and filters.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 13 people found this instruction helpful

Parts Used

  • Light Bulb - 40W

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerHerbert from Norton MA

Burned out light bulbs in microwave hood stove

I had some difficulty removing the glass plate because of the awkward (upside down) position of the screw that retained it. After replacing the burned out bulbs and replacig the glass plate the problem of replacing the screw involved my dropping the thing several times before I got the screw threads to catch. I got a screw thread to catch enough to hold the glass plate in position and left it at that.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 15 people found this instruction helpful

Parts Used

  • Light Bulb - 40W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerjohn from plainfield IL

Burned out bulb

removed two screws,lowered the glass shield,removed the burned out bulb and replaced it with the new one. I ordered the bulb from parts select and recieved it two days later. It was a pleasure to deal with them, and certainly use them again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 14 people found this instruction helpful

Parts Used

  • Light Bulb - 40W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPablo from Burlingame CA

Light bulb burned-out

screwed in new bulb

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 17 people found this instruction helpful

Parts Used

  • Light Bulb - 40W

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customeralfred from summerville SC

Burnt out light bulb replacement

OPEN COMPARTMENT, INSTALLED BULB, CLOSED COMPARTMENT

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6